Ships to you between Thu. 02 May to Mon. 06 May
WP130WDT/GYW Kingbright
Ships to you between Fri. 26 Apr to Thu. 02 May
Display: LED; SMD; 7-segment; 14.22mm; red; 8-26mcd; anode; 0.56 Stock : 1
LED; SMD; 0602; blue; 70-150mcd; 1.6x1.2x0.6mm; 110°; 3.3÷4V; 20mA Stock : 1
LED Circuit Board Indicators Stock : 2
Display: LED; matrix; 5x7; red; 3-8mcd; anode; 39x22.9mm Stock : 1
Display Modules - LED Character and Numeric Red 7-Segment 2 Character Common Anode 1.85V 20mA 0.750" H x 0.984" W x 0.315" D (19.05mm x 25.00mm x 8.00mm) 18-DIP (0.600", 15.24mm) Stock : 0
LED Displays & Accessories Stock : 395
LED Displays & Accessories Stock : 0
Standard LEDs - SMD Stock : 1611
Standard LEDs - Through Hole T1 3/4 RED/GRN DIFF Stock : 0
Infrared Emitters 4x4mm RA IR SMD LED Stock : 1
LED Circuit Board Indicator LED Circuit Board Indicator Single Green Tinted 2.2V 20mA Round with Domed Top 2.00mm Dia Through Hole, Right Angle Stock : 1
LED Circuit Board Indicators RED DIFFUSED VERTICAL Stock : 1
LED Circuit Board Indicator LED Circuit Board Indicator Single Green Tinted 2.2V 10mA Round with Domed Top 5mm, T-1 3/4 Through Hole Stock : 1
Dialight LED Circuit Board Indicators 3mm CBI Stock : 1
LED Circuit Board Indicators 5MM STAND-OFF 0 900" GRN LC Stock : 1
Dialight LED Circuit Board Indicators GREEN DIFFUSED LOW CURRENT Stock : 1
LED Circuit Board Indicators HI EFF GREEN DIFF Stock : 1
LED Circuit Board Indicators GREEN DIFFUSED 5 VOLT Stock : 1
LED Circuit Board Indicators LED CBI Stock : 8318
LED Circuit Board Indicators 5MM CBI GREEN HI-EFF Stock : 1
WP130WDT/GYW T-1 (3mm) Single-Level Circuit Board Indicator DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode FEATURES Pre-trimmed leads for pc board mounting 3 leads with common lead Black case enhances contrast ratio Housing UL rating: 94V-0 Housing material: Type 66 nylon Green Yellow RoHS compliant APPLICATIONS Green Status indicator Illuminator Yellow Signage applications Decorative and entertainment lighting Commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 18 40 Green (GaP) WP130WDT/GYW White Diffused 60 Yellow (GaAsP/GaP) 10 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAF1122 / 1102000199 Rev No: V.10B Date: 03/26/2021 WP130WDT/GYW ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Green 565 Wavelength at Peak Emission I = 20mA - nm F peak Yellow 590 Green 568 1 Dominant Wavelength I = 20mA - nm F dom Yellow 588 Spectral Bandwidth at 50% REL MAX Green 30 - nm I = 20mA Yellow 35 F Green 15 Capacitance C - pF Yellow 20 2 Green 2.2 2.5 Forward Voltage I = 20mA V V F F Yellow 2.1 2.5 Green 10 Reverse Current (V = 5V) I - A R R Yellow 10 Temperature Coefficient of Green 0.1 peak TC - nm/C peak I = 20mA, -10C T 85C Yellow 0.12 F Temperature Coefficient of Green 0.06 dom TC - nm/C dom I = 20mA, -10C T 85C Yellow 0.07 F Temperature Coefficient of V Green -2 F TC - mV/C V I = 20mA, -10C T 85C Yellow -2 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Yellow Power Dissipation P 62.5 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 110 110 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 25 30 mA F 1 Peak Forward Current I 140 140 mA FM Electrostatic Discharge Threshold (HBM) 8000 8000 V - 2 Thermal Resistance (Junction / Ambient) R 530 610 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 330 380 C/W th JS 3 Lead Solder Temperature 260C For 3 Seconds 4 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm per pad). 3. 2mm below package base. 4. 5mm below package base. 5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAF1122 / 1102000199 Rev No: V.10B Date: 03/26/2021