WP153HDT Kingbright

2.3x7mm RECTANGULAR SOLID LAMP WP153HDT BRIGHT RED Features Description LOW POWER CONSUMPTION. The Bright Red source color devices are made RELIABLE AND RUGGED. with Gallium Phosphide Red Light Emitting Diode. EXCELLENT UNIFORMITY OF LIGHT OUTPUT. SUITABLE FOR LEVEL INDICATOR. I.C. COMPATIBLE. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF6410 REV NO: V.1 DATE: AUG/02/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1101001951Selection Guide Iv (mcd) V i e w i n g 10mA Angle Part No. Dice Lens Type Min. Typ. 2 1/2 WP153HDT BRIGHT RED (GaP) RED DIFFUSED 0.3 0.6 110 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Bright Red 700 nm I =20mA F D Dominant Wavelength Bright Red 660 nm I =20mA F 1/2 Spectral Line Half-width Bright Red 45 nm I =20mA F C Capacitance Bright Red 40 pF V =0V f=1MHz F V Forward Voltage Bright Red 2.25 2.5 V I =20mA F F I Reverse Current Bright Red 10 uA V = 5V R R Absolute Maximum Ratings at TA=25C Parameter Bright Red Units Power dissipation 120 mW DC Forward Current 25 mA Peak Forward Current 1 130 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF6410 REV NO: V.1 DATE: AUG/02/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1101001951