WP36BHD Kingbright

WP36BHD T-1 (3mm) Blinking LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS z The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti- Electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z T-1 package with rectangular base z With built-in blinking IC z Operation voltage from 3.5V to 14V z Blinking frequency from 3.0Hz to 1.5Hz z RoHS compliant APPLICATIONS z Status indicator z Illuminator z Signage applications z Decorative and entertainment lighting z Commercial and residential architectural lighting Notes: ATTENTION 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. Observe precautions for handling 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. electrostatic discharge sensitive devices SELECTION GUIDE 1 Iv (mcd) V = 9V Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 WP36BHD Bright Red (GaP) Red Diffused 0.6 1.8 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2018 Kingbright. All Rights Reserved. Spec No: DSAE8732 / 1101003773 Rev No: V.9B Date: 03/13/2018 WP36BHD ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Peak Wavelength Bright Red - 700 - nm peak 1 Dominant Wavelength Bright Red - 635 - nm dom Spectral Bandwidth at 50% REL MAX Bright Red - 45 - nm Forward Current Min: V = 3.5V Typ: V = 5V I Bright Red 8 22 - mA F F F Supply Current V = 3.5V ISON Bright Red - 8 - mA F Supply Current V = 14V ISON Bright Red - 44 - mA F Blink Frequency V = 3.5V~14V f Bright Red 1.5 - 3 Hz F Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 310 mW D Reverse Voltage V 0.5 V R Junction Temperature T 125 C j Operating Temperature T -40 to +70 C op Storage Temperature T -40 to +85 C stg Forward Voltage V 14 V F Electrostatic Discharge Threshold (HBM) 1000 V - 1 Lead Solder Temperature 260C For 3 Seconds 2 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2018 Kingbright. All Rights Reserved. Spec No: DSAE8732 / 1101003773 Rev No: V.9B Date: 03/13/2018