WP710A10GD5V Kingbright

WP710A10GD5V T-1 (3mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS z The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z Low power consumption z Popular T-1 diameter package z General purpose leads z Reliable and rugged z Long life - solid state reliability z Available on tape and reel z 5V internal resistor z RoHS compliant APPLICATIONS z Status indicator z Illuminator z Signage applications Notes: 1. All dimensions are in millimeters (inches). z Decorative and entertainment lighting 2. Tolerance is 0.25(0.01 ) unless otherwise noted. z Commercial and residential architectural lighting 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. ATTENTION Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) V = 5V Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 WP710A10GD5V Green (GaP) Green Diffused 12 25 50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAL0503 / 1101029206 Rev No: V.10B Date: 11/18/2019 WP710A10GD5V ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission V = 5V Green 565 - nm F peak 1 Dominant Wavelength V = 5V Green 568 - nm F dom Spectral Bandwidth at 50% REL MAX Green 30 - nm V = 5V F Forward Current V = 5V I Green 11.5 17.5 mA F F Reverse Current (V = 5V) I Green - 10 A R R Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 85 mW D Reverse Voltage V 5 V R Junction Temperature T 110 C j Operating Temperature T -40 to +70 C op Storage Temperature T -40 to +85 C stg Forward Voltage V 6 V F Electrostatic Discharge Threshold (HBM) 3000 V - 1 Lead Solder Temperature 260C For 3 Seconds 2 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAL0503 / 1101029206 Rev No: V.10B Date: 11/18/2019