WP7113SRD14V Kingbright

WP7113SRD14V T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Low power consumption Popular T-1 diameter package General purpose leads Reliable and rugged Long life - solid state reliability Available on tape and reel 14V internal resistor RoHS compliant APPLICATIONS Status indicator Illuminator Notes: 1. All dimensions are in millimeters (inches). Signage applications 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. Decorative and entertainment lighting 4. The specifications, characteristics and technical data described in the datasheet are subject to change Commercial and residential architectural lighting without prior notice. ATTENTION Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) V = 14V Viewin g Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 180 300 Super Bright Red WP7113SRD14V Red Diffused 30 (GaAlAs) *60 *100 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2020 Kingbright. All Rights Reserved. Spec No: DSAF2436 / 1101005268 Rev No: V.7A Date: 12/01/2020 WP7113SRD14V ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission V = 14V Super Bright Red 655 - nm F peak 1 Dominant Wavelength V = 14V Super Bright Red 640 - nm F dom Spectral Bandwidth at 50% REL MAX Super Bright Red 20 - nm V = 14V F Forward Current V = 14V I Super Bright Red 10.5 13.5 mA F F Reverse Current (V = 5V) I Super Bright Red - 10 A R R Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 160 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +70 C op Storage Temperature T -40 to +85 C stg Forward Voltage V 16 V F Electrostatic Discharge Threshold (HBM) 3000 V - 1 Lead Solder Temperature 260C For 3 Seconds 2 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2020 Kingbright. All Rights Reserved. Spec No: DSAF2436 / 1101005268 Rev No: V.7A Date: 12/01/2020