WP7676CSEC/E Kingbright

7.6mmX7.6mm SUPER FLUX LED LAMP Part Number: WP7676CSEC/E Hyper Red Features Description z Super flux output. The Hyper Red source color devices are made with Al- z Design for high current operation. GaInP on GaAs substrate Light Emitting Diode. z Outstanding material efficiency. z Reliable and rugged. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2274 REV NO: V.2 DATE: AUG/01/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101010226 Selection Guide Iv (mcd) 2 v (mlm) 2 Viewing 20mA * 20mA Angl e 1 Part No. Dice Lens Type Min. Typ. Typ. 2 1/2 WP7676CSEC/E Hyper Red (AlGaInP) Water Clear 480 800 900 70 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%.*LEDs are binned according to their Luminous intensity. 3. Drive current between 10mA and 30mA are recommended for long term performance. 4. Operation at current below 10mA is not recommended. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Hyper Red 630 nm IF=20mA D 1 Dominant Wavelength Hyper Red 621 nm IF=20mA 1/2 Spectral Line Half-width Hyper Red 20 nm IF=20mA C Capacitance Hyper Red 25 pF VF=0V f=1MHz VF 2 Forward Voltage Hyper Red 2 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current 1 195 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2274 REV NO: V.2 DATE: AUG/01/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101010226