AHC0609680M035R

SMD Aluminum Hybrid Electrolytic Capacitors AHC Series FEATURES Low ESR High Ripple Current Resistance LEAD-FREE COMPATIBLE 125C, 4000 hours COMPONENT RoHS compliant APPLICATIONS Commercial/Industrial power supply applications requiring high capacitance in energy-dense, in small-volume packages with a low ESR HOW TO ORDER HC A 0811 221 M 025 R - Special No Code = std Product Type Aluminum Packaging R = Pure Tin 15Reel Series Type Rated DC Voltage Case Size 025 = 25Vdc See table below 035 = 35Vdc Capacitance Code 050 = 50Vdc F code: 1st two digits represent significant figures, 3rd digit 063 = 63Vdc represents multiplier (number of zeros to follow) 080 = 80Vdc Tolerance M = 20% CASE DIMENSIONS millimeters (inches) MARKING D0.50 L0.50 A0.20 B0.20 C0.20 P0.30 C-PN Code + XXX-ID Code Code R V max (0.020) (0.020) (0.008) (0.008) (0.008) (0.012) Capacitance 6.30 9.30 6.60 6.60 7.30 0.50-0.80 2.00 0.30 (Code as in p/n) 0609 CXXX (0.248) (0.366) (0.260) (0.260) (0.287) (0.020-0.031) (0.080) (0.012) AVX Logo 8.00 11.50 8.30 8.30 9.00 0.70-1.10 3.20 0.30 221 0811 (0.315) (0.453) (0.327) (0.327) (0.354) (0.028-0.043) (0.126) (0.012) 025 8.00 12.00 8.30 8.30 9.00 0.70-1.10 3.20 0.30 0812 (0.315) (0.472) (0.327) (0.327) (0.354) (0.028-0.043) (0.126) (0.012) Polarity Band 10.00 12.50 10.30 10.30 11.00 0.70-1.30 4.50 0.30 Voltage 1012 Anode + (Code as in p/n) (0.394) (0.492) (0.406) (0.406) (0.433) (0.028-0.051) (0.177) (0.012) TECHNICAL SPECIFICATIONS Category Temperature Range: -55C to +125C Capacitance Range: At 20C,120Hz 15F to 470F Capacitance Tolerance: At 20C,120Hz 20% Measurement Frequency: Please see the ratings and part number Dissipation Factor (%) 120Hz at 20C reference table below After 2 minutes at rated Leakage Current: I 0.01CV or 3A, whichever is greater working voltage at 20C* * Note: In the case of an anomalous reading, re-measure the leakage current after following voltage treatment: Voltage treatment: DC rated voltage to be applied to the capacitors for 120 minutes at 125C. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 38 061121SMD Aluminum Hybrid Electrolytic Capacitors AHC Series CAPACITANCE AND RATED VOLTAGE RANGE (FIGURES DENOTES CASE SIZE) Capacitance Rated Voltage DC (V ) R F Code 25V 35V 50V 63V 80V 15 150 0609 22 220 0609 47 470 0609 0811 0812 68 680 0609 100 101 0609 220 221 0811 1012 470 471 1012 Released ratings RATINGS & PART NUMBER REFERENCE ESR Max. 100kHz RMS Case Capacitance DCL Max. DF Max. AVX Part No. Rated Voltage (V) 100kHz Current Size (F) (A) (%) (m) (mA)/125C 25 Volt AHC0609101M025R 0609 100 25 25 12 30 1400 AHC0811221M025R 0811 220 25 55 12 27 1400 AHC1012471M025R 1012 470 25 117.5 12 20 2000 35 Volt AHC0609470M035R 0609 47 35 16.5 12 60 900 AHC0609680M035R 0609 68 35 23.8 12 40 1200 AHC1012221M035R 1012 220 35 77 12 30 1800 50 Volt AHC0609220M050R 0609 22 50 11 12 90 900 AHC0811470M050R 0811 47 50 23.5 12 35 1100 63 Volt AHC0609150M063R 0609 15 63 9.5 12 100 800 80 Volt AHC0812470M080R 0812 47 80 37.6 12 40 1000 All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 120Hz F(Hz) < 1K 1K F(Hz) < 10K 10K F(Hz) < 100K 100K(Hz) F Coefficient 0.05 0.30 0.70 1.00 QUALIFICATION TABLE AHC series (Temperature range -55C to +125C) Test Condition Characteristics Visual Examination no visible damage The following specifications shall be satisfied when the C/C 30% of the initial limit capacitors are restored to normal temperature after storing Endurance them for 2000 hours under no-load at 1252C. DF 200% of the initial specified limit The rated voltage with ripple current is applied for ESR 200% of the initial specified limit 4000 hours at 125C. DCL Initial specified limit or less Visual Examination no visible damage C/C 30% of the initial limit Humidity The following specifications shall be satisfied when the rated Resistance DF 200% of the initial specified limit voltage is applied for 2000 hours at 852C and 85 to 90% RH. (On-Load) ESR 200% of the initial specified limit DCL Initial specified limit or less The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 39 061121