Ledex Rotary Solenoids Size 5S Precision Standard Coil Performance Specifications How to Order 1 Holding Starting Torque (lb-in) 20C 1. Using the Performance Chart to the left, select one 2 Torque Maximum Duty Cycle of the five columns which provides the appropriate Stroke (lb-in) 100% 50% 25% 10% 5% duty cycle for your application. Reading down this 25 5.0 1.9 4.1 7.3 12.1 13.2 column locate the torque for the stroke you need. For 35 * 1.2 2.6 4.5 7.8 9.2 net available starting torque, subtract return spring 45 3.0 0.7 1.7 3.4 6.3 6.9 torque of 0.25 lb.-in. 20% (if torque is insufficient go 55 * * * * * * to next larger solenoid size). 1 67 * 0.5 1.2 2.2 3.9 4.9 2. Use the chart below to select the model number 2 corresponding to your desired design, stroke and 75 * * * * * * direction of rotation (as viewed from armature end, 95 2.0 0.2 0.5 1.0 1.9 2.6 opposite mounting studs). 110 * * * * * * 3. Using the Specification Chart to the right, select the All data is at 20C coil temperature. Force (torque) same duty cycle column. Follow down the column outputs degrade with elevated temperatures. into the VDC ratings. Select the voltage which most 1 Gross starting torques are shown. For net available closely matches your supply voltage. Read across to starting torque, subtract return spring torque of 0.25 the left to select the coil awg suffix. lb.-in. 20%. 4. Replace the last two digits of the model number 2 Holding torque is shown at the stabilized temperature (XX) with the coil awg number to complete the part of 105C and continuous duty. number. * Consult factory. Please see www.ledex.com (click on Stock Products tab) for our list of stock products available through our All catalog products manufactured after North American distributors. April 1, 2006 are RoHS Compliant Armature cover Armature cover Armature cover No shafts Armature end shaft Base end shaft Double shaft Armature end shaft Base end shaft Double shaft 3 tapped holes 3 tapped holes 3 tapped holes 3 tapped holes Return spring Return spring Return spring Return spring Return spring Return spring Return spring Stroke/ Nom. Axial Direction* Stroke Standard Long Life Standard Long Life Standard Long Life Standard Long Life Standard Long Life Standard Long Life Standard Long Life 25 CW 0.042 H-2480-0XX L-2480-0XX H-2073-0XX L-2073-0XX H-15165-0XX L-15165-0XX H-1082-0XX L-1082-0XX H-2668-0XX L-2668-0XX H-2050-0XX L-2050-0XX H-2414-0XX L-2414-0XX 25 CCW 0.042 H-2657-0XX L-2657-0XX H-2593-0XX L-2593-0XX H-3421-0XX L-3421-0XX H-2434-0XX L-2434-0XX H-2669-0XX L-2669-0XX H-3189-0XX L-3189-0XX H-2708-0XX L-2708-0XX 35 CW 0.045 H-2658-0XX L-2658-0XX H-2681-0XX L-2681-0XX H-2874-0XX L-2874-0XX H-2560-0XX L-2560-0XX H-3151-0XX L-3151-0XX H-2186-0XX L-2186-0XX H-2875-0XX L-2875-0XX 35 CCW 0.045 H-3384-0XX L-3384-0XX H-2479-0XX L-2479-0XX H-1423-0XX L-1423-0XX H-1087-0XX L-1087-0XX H-1431-0XX L-1431-0XX H-3276-0XX L-3276-0XX H-2016-0XX L-2016-0XX 45 CW 0.045 H-2527-0XX L-2527-0XX H-2383-0XX L-2383-0XX H-1345-0XX L-1345-0XX H-2397-0XX L-2397-0XX H-2555-0XX L-2555-0XX H-2136-0XX L-2136-0XX H-3397-0XX L-3397-0XX 45 CCW 0.045 H-1125-0XX L-1125-0XX H-2300-0XX L-2300-0XX H-15072-0XX L-15072-0XX H-2185-0XX L-2185-0XX H-3238-0XX L-3238-0XX H-1308-0XX L-1308-0XX H-2845-0XX L-2845-0XX 55 CW 0.048 H-15305-0XX H-15310-0XX H-15315-0XX H-15320-0XX H-15325-0XX H-15330-0XX H-15335-0XX 55 CCW 0.048 H-15306-0XX H-15311-0XX H-15316-0XX H-15321-0XX H-15326-0XX H-15331-0XX H-15336-0XX 1 67 CW 0.050 H-1390-0XX H-2349-0XX H-3375-0XX H-2522-0XX H-2075-0XX H-1020-0XX H-3399-0XX 2 1 67 CCW 0.050 H-3385-0XX H-2262-0XX H-3377-0XX H-2902-0XX H-3249-0XX H-15055-0XX H-3400-0XX 2 75 CCW 0.050 H-15307-0XX H-15312-0XX H-15317-0XX H-15322-0XX H-15327-0XX H-15332-0XX H-15337-0XX 95 CW 0.055 H-2010-0XX H-2382-0XX H-15150-0XX H-2714-0XX H-2074-0XX H-2957-0XX H-1155-0XX 95 CCW 0.055 H-1248-0XX H-2747-0XX H-15131-0XX H-2296-0XX H-2150-0XX H-1307-0XX H-1154-0XX 110 CW 0.055 H-15308-0XX H-15313-0XX H-15318-0XX H-15323-0XX H-15328-0XX H-15333-0XX H-15338-0XX 110 CCW 0.055 H-15309-0XX H-15314-0XX H-15319-0XX H-15324-0XX H-15329-0XX H-15334-0XX H-15339-0XX * Direction of rotation (cw clockwise or ccw counterclockwise) is viewed from the armature end of the solenoid opposite the mounting studs. Note: The XX in the part number suffix must be filled in with the awg of your choice. Ledex Solenoids D22 www.ledex.com 1.937.454.2345 Fax: 1.937.898.8624 ROTARY SolenoidsROTARY Solenoids Ledex Rotary Solenoids Size 5S Precision Standard Coil General Specifications Coil Specifications Dielectric Strength 23 awg, 1000 VRMS Maximum Duty Cycle 100% 50% 25% 10% 5% 24-33 awg, 1200 VRMS Maximum ON Time (sec) 100 36 10 3.5 Recommended Maximum watts dissipated 1 when pulsed continuously Minimum Heat Sink by solenoid are based on an Maximum ON Time (sec) 160 44 13 4.6 unrestricted flow of air at 20C, with 2 for single pulse solenoid mounted on the equivalent 1 of an aluminum plate measuring 7 2 Watts ( 20C) 21 42 84 210 420 1 square by thick. 8 Ampere Turns ( 20C) 860 1220 1720 2730 3853 Coil Resistance 5% tolerance Coil Data Starting Torque Gross torque values are shown. For net starting torque, subtract return awg Resistance VDC VDC VDC VDC VDC 3 4 spring torque (0XX) ( 20C) Turns (Nom) (Nom) (Nom) (Nom) (Nom) Return Spring Torque 0.25 pound-inches 20% 23 2.03 288 6.1 8.6 12.1 19.2 27.0 Weight 9.0 oz (255.2 gms) 24 3.20 360 7.6 10.8 15.3 24.0 34.0 Dimensions See page D34 25 4.91 440 9.6 13.6 19.2 31.0 43.0 26 7.72 550 12.1 17.1 24.0 38.0 54.0 27 11.12 636 15.0 21.0 30.0 48.0 67.0 1 28 18.79 840 19.2 27.0 39.0 61.0 86.0 Continuously pulsed at stated watts and duty cycle. 2 29 30.48 1088 24.0 34.0 48.0 77.0 108.0 Single pulse at stated watts (with coil at ambient room 30 44.86 1275 30.0 43.0 61.0 96.0 136.0 temperature 20C). 3 31 70.90 1596 38.0 54.0 76.0 121.0 171.0 Other coil awg sizes available, consult factory. 4 32 109.00 1974 47.0 67.0 95.0 150.0 212.0 Reference number of turns. 33 175.00 2496 60.0 86.0 121.0 192.0 271.0 All specifications subject to change without notice. Armature cover Armature cover Armature cover No shafts Armature end shaft Base end shaft Double shaft Armature end shaft Base end shaft Double shaft 3 tapped holes 3 tapped holes 3 tapped holes 3 tapped holes Return spring Return spring Return spring Return spring Return spring Return spring Return spring Stroke/ Nom. Axial Direction* Stroke Standard Long Life Standard Long Life Standard Long Life Standard Long Life Standard Long Life Standard Long Life Standard Long Life 25 CW 0.042 H-2480-0XX L-2480-0XX H-2073-0XX L-2073-0XX H-15165-0XX L-15165-0XX H-1082-0XX L-1082-0XX H-2668-0XX L-2668-0XX H-2050-0XX L-2050-0XX H-2414-0XX L-2414-0XX 25 CCW 0.042 H-2657-0XX L-2657-0XX H-2593-0XX L-2593-0XX H-3421-0XX L-3421-0XX H-2434-0XX L-2434-0XX H-2669-0XX L-2669-0XX H-3189-0XX L-3189-0XX H-2708-0XX L-2708-0XX 35 CW 0.045 H-2658-0XX L-2658-0XX H-2681-0XX L-2681-0XX H-2874-0XX L-2874-0XX H-2560-0XX L-2560-0XX H-3151-0XX L-3151-0XX H-2186-0XX L-2186-0XX H-2875-0XX L-2875-0XX 35 CCW 0.045 H-3384-0XX L-3384-0XX H-2479-0XX L-2479-0XX H-1423-0XX L-1423-0XX H-1087-0XX L-1087-0XX H-1431-0XX L-1431-0XX H-3276-0XX L-3276-0XX H-2016-0XX L-2016-0XX 45 CW 0.045 H-2527-0XX L-2527-0XX H-2383-0XX L-2383-0XX H-1345-0XX L-1345-0XX H-2397-0XX L-2397-0XX H-2555-0XX L-2555-0XX H-2136-0XX L-2136-0XX H-3397-0XX L-3397-0XX 45 CCW 0.045 H-1125-0XX L-1125-0XX H-2300-0XX L-2300-0XX H-15072-0XX L-15072-0XX H-2185-0XX L-2185-0XX H-3238-0XX L-3238-0XX H-1308-0XX L-1308-0XX H-2845-0XX L-2845-0XX 55 CW 0.048 H-15305-0XX H-15310-0XX H-15315-0XX H-15320-0XX H-15325-0XX H-15330-0XX H-15335-0XX 55 CCW 0.048 H-15306-0XX H-15311-0XX H-15316-0XX H-15321-0XX H-15326-0XX H-15331-0XX H-15336-0XX 1 67 CW 0.050 H-1390-0XX H-2349-0XX H-3375-0XX H-2522-0XX H-2075-0XX H-1020-0XX H-3399-0XX 2 1 67 CCW 0.050 H-3385-0XX H-2262-0XX H-3377-0XX H-2902-0XX H-3249-0XX H-15055-0XX H-3400-0XX 2 75 CCW 0.050 H-15307-0XX H-15312-0XX H-15317-0XX H-15322-0XX H-15327-0XX H-15332-0XX H-15337-0XX 95 CW 0.055 H-2010-0XX H-2382-0XX H-15150-0XX H-2714-0XX H-2074-0XX H-2957-0XX H-1155-0XX 95 CCW 0.055 H-1248-0XX H-2747-0XX H-15131-0XX H-2296-0XX H-2150-0XX H-1307-0XX H-1154-0XX 110 CW 0.055 H-15308-0XX H-15313-0XX H-15318-0XX H-15323-0XX H-15328-0XX H-15333-0XX H-15338-0XX 110 CCW 0.055 H-15309-0XX H-15314-0XX H-15319-0XX H-15324-0XX H-15329-0XX H-15334-0XX H-15339-0XX * Direction of rotation (cw clockwise or ccw counterclockwise) is viewed from the armature end of the solenoid opposite the mounting studs. Note: The XX in the part number suffix must be filled in with the awg of your choice. Ledex Solenoids D23 www.ledex.com 1.937.454.2345 Fax: 1.937.898.8624