Product Information

CONSMA007

CONSMA007 electronic component of Linx Technologies

Datasheet
RF Connectors / Coaxial Connectors SMA Male Cable End Crimp RG-174 Cable

Manufacturer: Linx Technologies
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 3.8061 ea
Line Total: USD 3.81

2258 - Global Stock
Ships to you between
Tue. 14 May to Thu. 16 May
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
1765 - WHS 1


Ships to you between Tue. 14 May to Thu. 16 May

MOQ : 1
Multiples : 1

Stock Image

CONSMA007
Linx Technologies

1 : USD 2.369
2000 : USD 2.3575
4000 : USD 2.346
10000 : USD 2.346

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
RF Series
Gender
Impedance
Maximum Frequency
Termination Style
Mounting Type
Polarity
Orientation
Cable Type
Body Material
Contact Plating
Packaging
Series
Brand
Contact Material
Body Finish
Factory Pack Quantity :
Body Style
Contact Termination
Voltage Rating
Insertion Loss
Cnhts
Coupling Mechanism
Hts Code
Insulation Resistance
Mating Cycles
Maximum Operating Temperature
Minimum Operating Temperature
Mxhts
Product Type
Subcategory
Taric
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
EVAL-433-LT electronic component of Linx Technologies EVAL-433-LT

Sub-GHz Development Tools LT Basic Eval System 433MHz (NEW)
Stock : 1

CONSMA006.031 electronic component of Linx Technologies CONSMA006.031

RF Connectors / Coaxial Connectors SMA Fml Edge Multi Mnt for 0.031" PCB
Stock : 1

CAEK-868 electronic component of Linx Technologies CAEK-868

Antenna Development Tools Connectorized Ant. Eval Kit 868MHz
Stock : 1

AEK-916-CHP electronic component of Linx Technologies AEK-916-CHP

Antenna Development Tools 916MHz Chip Ant. Eval Kit
Stock : 0

EVAL-433-HH-KF-DS electronic component of Linx Technologies EVAL-433-HH-KF-DS

Sub-GHz Development Tools 433MHz DS Keyfob Transmitter Eval Kit
Stock : 0

EVAL-433-HH-KF-HT electronic component of Linx Technologies EVAL-433-HH-KF-HT

Sub-GHz Development Tools 433MHz HT Keyfob Transmitter Eval Kit
Stock : 0

EVM-GPS-F4 electronic component of Linx Technologies EVM-GPS-F4

GPS Development Tools F4 Series GPS Recvr Evaluation Module
Stock : 1

AEK-433-SP electronic component of Linx Technologies AEK-433-SP

Antenna Development Tools ANTENNA EVALUATION KIT, 4
Stock : 0

AEK-LTE-CER electronic component of Linx Technologies AEK-LTE-CER

Antenna Development Tools Multi-Band CER Series Embedded LTE / Cellular Chip 1/4 Wave Monopole Antenna Evaluation Kit
Stock : 3

MDEV-868-PRO electronic component of Linx Technologies MDEV-868-PRO

Sub-GHz Development Tools HumPRO Master Development 868MHz
Stock : 0

Image Description
5-1814807-1 electronic component of TE Connectivity 5-1814807-1

RF Connectors / Coaxial Connectors PCB Skt 50 Ohm White MP
Stock : 0

1-1478033-0 electronic component of TE Connectivity 1-1478033-0

RF Connectors / Coaxial Connectors Str PCB Skt White MP 75Ohm
Stock : 1

Hot 122122 electronic component of Amphenol 122122

RF Connectors / Coaxial Connectors TNC ST JK 58/141 NIC LMR 195 BELDEN7806A
Stock : 1

Hot 122400 electronic component of Amphenol 122400

RF Connectors / Coaxial Connectors TNC BULKHEAD SOLDER JACK .085 SEMI-RIGID
Stock : 1

Hot 5413589-3 electronic component of TE Connectivity 5413589-3

RF Connectors / Coaxial Connectors H.C. PLUG 75 OHM
Stock : 1

031-10-RFX electronic component of Amphenol 031-10-RFX

Conn BNC RCP 0Hz to 4GHz 50Ohm Solder Cup ST Panel Mount Silver
Stock : 123

Hot 73403-5113 electronic component of Molex 73403-5113

RF Connectors / Coaxial Connectors SMB JACK FAKRA RA TH KEY D 50OHM BV
Stock : 1

KH-SMA-K513-11G electronic component of Kinghelm KH-SMA-K513-11G

RF Connectors/Coaxial Connectors RoHS
Stock : 0

25-7635 electronic component of Bel Fuse 25-7635

RF Connectors Coaxial Connectors F JACK STRT SOLDER FLANGE MOUNT
Stock : 1

DOSIN-801-0034 electronic component of dosinconn DOSIN-801-0034

Plugin RF Connectors / Coaxial Connectors ROHS
Stock : 1

REVISIONS REV DESCRIPTION DATE APPV A INITIAL RELEASE OF LINX INTERNAL DRAWING 01/MAR/19 CLL 15.00 HEX 8.00 0.591 8.50 8.30 0.315 0.335 5.00 0.327 0.60 2.50 0.197 0.024 0.098 1/4 -36UNS-2B 9.24 THREADS 0.364 0.92 1.27 2.70 0.036 0.050 PIN 6.43 0.106 0.253 NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE IN mm INCHES . 9.50 20.00 2. DIMENSIONS APPLY AFTER FINISHING. 0.374 0.787 3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, 3.90 5.00 USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES 0.154 0.197 OF VERY HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE SOURCED MATERIALS. 4. SAFETY BREAK ALL SHARP CORNERS AND EDGES 0.5 MAXIMUM. 5 SEE TABLE I FOR ELECTRICAL SPECIFICATIONS. (SHEET 2) PIN CRIMP HEAT 6 SEE TABLE II FOR ENVIRONMENTAL SPECIFICATIONS. (SHEET 2) BODY RING SHRINK 7 SEE TABLE III FOR MECHANICAL SPECIFICATIONS. (SHEET 2) EXPLODED VIEW 8. SEE PARTSLIST. INDICATES FINISH TYPE. SCALE 2 : 1 WARNING: THIS DRAWING CONTAINS PROPRIETARY INFORMATION 159 ORT LANE THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE MERLIN, OR 97532 TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE TITLE: EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS DESIGNATED AGENTS. SMA MALE CABLE END CRIMP MATERIAL: PROJECTION: TOLERANCES: 0.50 .020 -5.00 .200 = 0.20 .008 FOR RG-174 CABLE 5.00 .200 -30.00 1.200 = 0.40 .016 30.0 1.20 -120.0 4.75 = 0.60 0.24 SIZE DWG. NO. REV 120.0 4.75 -315.0 12.40 = 1.0 .040 ANGLES: 1 SCALE 1 : 1 FINISH: DRAWN: M. SCHULTE DT: 21/JAN/19 A CONSMA007-* A ENGR: D. VARATHARAJAN DT: 08/MAR/19 SCALE: 3:1 DO NOT SCALE DRAWING SHEET 1 OF 2 LDCFDAL C FILE://M: Linx Web Website Content Diagrams Current on site consma007.pdfSEE SHEET 1 FOR REVISIONS 5 TABLE I ASSEMBLY INSTRUCTIONS 1. Strip the cable to the recommended dimensions. 2. Slip heat shrink and crimp ring onto stripped cable. 3. Solder the pin to the center-conductor. 4. Insert the pin, center-conductor and insulator into the body until the top of the pin is flush with the opening of the body. 5. Wrap the braid around the tail of the body and crimp the ring with a 0.128 hex crimp tool, (or one labeled for use with RG-174 cable). 6. Use heat shrink to cover crimp. 6 TABLE II 2.00 0.079 2.00 6.50 0.079 0.256 RG-174 CABLE RECOMMENDED CABLE STRIPPING DIMENSIONS 7 TABLE III CAN ALSO BE USED WITH: RG-188A & RG-316 SIZE DWG. NO. REV A CONSMA007-* A SCALE: 1:1 DO NOT SCALE DRAWING SHEET 2 OF 2 LDCFDAL A

Tariff Desc

8536.69.10 62 Plugs and sockets for co-axial cables or printed circuits Free

8536.69.90 CONNECTORS, ELECTRICAL, being ANY of the following:
(a) plugs;
(b) sockets;
(c) adaptors
TC 1225594

8536.69.90 PLUG AND SOCKET COMBINATIONS, being ANY of the following:
(a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current of 15 amps;
(b) 2, 3 OR 12 way, single in line pin header;
(c) 1.3mm plug to 2.1mm socket;
(d) 2.5mm plug to 3.5mm socket
TC 9900931

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
TC 9900883

8536.69 JACKS, phono, RCA Type
TC 8438480

8536.69.90 CONNECTORS, electrical, incorporating twist locking mechanism
TC 9703905

8536.70.90 CONNECTORS, OPTICAL Op. 12.06.2007 FIBRE
TC 0708845

8536.69 PLUGS, modular, telephone, to suit RJ 11 sockets and complying with US Standard FCC 68
TC 9203687

8536.90.90 LUGS, being solderable, copper connectors
TC 0613954

8535.90.00 CRIMPING TERMINALS, having bell-mouth OR flared cable entry
TC 9504891

8536.90 HOLDERS, dry cell
TC 8438464

8536.69.90 TC 1440896 POWER POINTS, plastic AND/OR metal, single OR multiple power outlet, with OR without EITHER of the following:
(a) LED (light-emitting diode) night light;
(b) single OR multiple power switches

8536.69 PLUGS/SOCKETS, adaptor being EITHER of the following:
(a) providing for plug or socket configurations used in other countries to connect to Australian standard plugs or sockets;
(b) providing for plug or socket configurations of Australian standard type to connect to plugs or sockets used in other countries
TC 8807068
LINX TECHNOLOGIES
Linx Technologies Inc
Linx Technologies Inc.

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted