Schottky Barrier Rectifier DSTF3060CR, 2x15A, 60V, ITO-220AB, Common Anode RoHS Pb DSTF3060CR Description This Littelfuse DST Ultra Low VF chottky Barrier Rectifier S series is designed to meet the general requirements of commercial and industry applications by providing high temperature, low leakage and lower V products. F It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Pin out Features Ultra lo w forward voltage Guard ring for enhanced drop ruggedness and long term reliability High frequency operation Common anode High junction 1 2 3 configuration in ITO- temperature capability 220AB package Cathode Anode Cathode Applications Switching mode power Free-Wheeling diodes supply Polarity Protection Diodes DC/DC converters Maximum Ratings Parameters Symbol Test Conditions Max Unit Peak Inverse Voltage V - 60 V RWM 50% duty cycle T =60C 15 (per leg) C Average Forward Current I A F(AV) rectangular wave form 30 (total device) Peak One Cycle Non-Repetitive Surge I 8.3 ms, half Sine pulse 170 A FSM Current (per leg) Electrical Characteristics Parameters Symbol Test Conditions Typ Max Unit 7.5A, Pulse, T = 25 C 0.48 - J V F1 15A, Pulse, T = 25 C 0.59 0.70 J Forward Voltage Drop (per leg) * V 7.5A, Pulse, T = 125 C 0.41 - J V F2 15A, Pulse, T = 125 C 0.55 0.65 J I V = rated V T = 25 C 0.024 1.2 R1 R R J Reverse Current (per leg) * mA I V = rated V T = 125 C 14 45 R2 R R J Junction Capacitance (per leg) C V = 5V, T = 25 C, G = 1MHz 712 - pF T R C fSI Clip mounting, the epoxy body away from the heatsink edge by more than 0.110 along the - 4500 lead direction. RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, V Clip mounting, the epoxy body is inside the V ISO - 3500 T = 25 C) heatsink. A Screw mounting, the epoxy body is inside - 1500 the heatsink. * Pulse Width < 300s, Duty Cycle <2% 2017 Littelfuse, Inc Specifications are subject to change without notice. Revised:03/19/18Schottky Barrier Rectifier DSTF3060CR, 2x15A, 60V, ITO-220AB, Common Anode Thermal-Mechanical Specifications Parameters Symbol Test Conditions Max Unit Junction Temperature T -55 to +150 C J Storage Temperature T -55 to +150 C stg Thermal Resistance Junction to R DC operation 6.0 C/W thJC Case (per leg) Approximate Weight wt 2 g Case Style ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: T ypical Reverse Characteristics C C C C Figure 3: Typical Junction Capacitance C 2017 Littelfuse, Inc Specifications are subject to change without notice. Revised:03/19/18