RMS1035 Lorlin

RMS ROTARY SWITCH RMS ROTARY MAINS SWITCH ELECTRICAL & MECHANICAL SPECIFICATION Switch Rating: 4/80A 250V ac. R/C Life: >15,000 Cycles 10A 12V dc Operating Temperature: -25C to +85C Proof Voltage: 3kVac (Initial) Insulation Resistance: >999M 500Vdc (Initial) Contact Resistance: <20m (Initial) Contact Gap: >2.5mm (min) Switch Contacts: Silver Cadmium Oxide Tag Panel: SRBP Switch Chamber: Polyamide 6.6 G.F. V0 Rated Terminals: Brass CZ108, Ag plated FEATURES Non changeover type Approved to EN61058 ENEC (VDE) Made in UK Double pole single throw Solder or pcb terminals 45 index angle Spindle flats (optional) TERMINAL LAYOUT OPTIONAL SPINDLE FLAT SHOWN. OPTIONAL SPINDLE FLATS Note: The angle of the spindle flat is shown with the locating lug at the bottom of the switch, when the switch is set in the fully anticlockwise position (position 1) viewed from the knob end of the spindle STANARD PART NUMBERS Basic A B C D E F Types Spindle Spindle Bush Spindle Spindle Spindle diameter length thread flat angle flat length 9.52 x 32TPI Imperial 6.35mm 55mm No Flat N/a N/a Metric 6.0mm 38mm M10 x0.75 No Flat N/a N/a Circuitry Terminal Terminal Standard Standard layout type Metric Imperial viewed from Switches Switches rear 2 pole off-on Solder RMS1035 RMS1100 PCB RMS1130 RMS1159 Circuity Terminal Terminal Standard Standard layout viewed type Metric Imperial from rear of Switches Switches switch 2 pole Solder RMS1089 RMS1101 changeover PCB RMS1153 RMS1128 (not approved)