ETC1-1T-2-TR MACOM

ETC1-1T-2TR E-Series RF 1:1 Transformer Rev. V2 0.1 200 MHz Schematic Features 1:1 Impedance Ratio Surface Mount Tape and reel packaging available Description M/A-COMs ETC1-1T-2 is a 1:1 RF transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion and impedance matching. Parts are packaged in tape & reel. Product Image SM-22 package 1 2 3 5 4 Pin Configuration Pin No. Function Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. 1 Secondary 2 Secondary CT 3 Secondary Dot 4 Primary Dot 5 Primary 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: ETC1-1T-2TR E-Series RF 1:1 Transformer Rev. V2 0.1 200 MHz Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency 0.1 - 200 MHz Insertion Loss 0.1 - 200 dB 0.3 1.5 Amplitude Imbalance 0.1 - 200 dB 0.5 Phase Imbalance 0.1 - 200 Degrees 5 1 Absolute Maximum Ratings Parameter Absolute Maximum RF Power 250 mW DC Current 30 mA Operating Temperature -40C to +85C Storage Temperature -55C to +125C 1. Operation of this device above any one of these parameters may cause permanent damage. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: