MC2007-3 3.3 V PIN Pre-Amplifier with AGC for Applications to 200 Mbps The MC2007-3 is a low-noise, transimpedance amplifier with AGC, manufactured in an advanced, low-cost, sub- micron CMOS process. Its wide dynamic range, differential output and high PIN bias make it well suited to high- performance telecommunications, especially OC-3/STM-1. However, due to its low cost, the MC2007-3 also meets the needs of datacom applications. The MC2007-3 is available in die form. For optimum system performance die should be mounted in close proximity with the photodetector. The MC2007-3 is designed to be used with the MC2045 or M02095 post amplifier IC. When combined with a photodiode, the chip set forms a high performance, low cost 3.3V receiver. Applications Features Optical Receivers (Up to 200 Mbps Operation) Low-cost, CMOS process SDH / SONET / ATM Receiver sensitivity typically -39 dBm at 155 Mbps, when integrated into a module with suitable photodiode and post-amplifier Fast Ethernet 140 MHz bandwidth allows wide range of operation: 100, 125, 155, ESCON and 200 Mbps Passive Optical Networks (PONs) Typical differential gain of 62 k at low signal levels SFP/SFF Transceivers AGC gives continuous operation to +3 dBm BiDi Transceivers 65 mW power consumption at +3.3 V supply > 35 dB Power-supply noise rejection Available as die only Functional Block Diagram Series Pass PINK Bandgap Regulator 1.23 V R REF Reference Set Max . Gain Generator AGC Control R D OUT +1 TZA PINA +1 D OUT +1 02007-DSH-002-E Mindspeed Technologies November 2007 Mindspeed Proprietary and ConfidentialOrdering Information Part Number Package Operating Temperature MC2007-XX Waffle pack 40 C to 85 C MC2007-XX Expanded whole wafer on a ring 40 C to 85 C MC2007-EVM MC2007 evaluation board with MC2045 post amp 40 C to 85 C Revision History Revision Level Date Description E Preliminary November 2007 Correct PinK absolute maximum information. Update format. D Preliminary June 2006 Updated format. Updated Absolute Maximum Ratings. Added TIA Use with Externally Biased Detectors section. C Preliminary June 2004 Added Note 7 to Table 2-4. B Preliminary June 2003 Added externally biases diode maximum to Absolute Maximum Ratings table. A Preliminary December 2000 Initial Release. Typical Eye Diagram Pad Configuration Eye diagram for 155 Mbps at 3 A input signal PP Die size 1010 x 960 m 02007-DSH-002-E Mindspeed Technologies ii Mindspeed Proprietary and Confidential