MABA-007569-ETK42T MACOM

MABA-007569-ETK42T 1:4 E-Series RF Transmission Line Step-up Transformer Rev. V3 2 - 1000 MHz Features Schematic Surface Mount Package Wide Frequency Range 1:4 Impedance CT on Secondary Lead Free RoHS* Compliant and 260C reflow compatible Description The MABA-007569-ETK42T is a RoHS compliant Pin Configuration 1:4 RF transmission line transformer in a surface mount package. The windings of this device are Pin No. Function welded to the package substrate for improved 1 Secondary Dot reliability and to eliminate lead content. Ideally suited for high volume cellular and wireless application. 2 Secondary CT 3 Secondary 4 Primary 5 Primary Dot Electrical Specifications: Freq. = 2 - 1000 MHz, T = 25C, Z = 50 A 0 Parameter Test Conditions Units Min Typ Max 5.0 - 250 MHz 1.0 3.0 - 500 MHz 2.0 Insertion Loss dB 0.32 2.5 - 700 MHz 3.0 2.0 - 1000 MHz 4.0 2.0 - 300 MHz 0.3 Amplitude Unbalance dB 300 - 1000 MHz 2.0 2.0 - 300 MHz 5 Phase Unbalance Degrees 300 - 1000 MHz 20 Electrical Specifications: Freq. = 2 - 1000 MHz, T = 25C, Z = 75 A 0 Parameter Test Conditions Units Min Typ Max 8.0 - 250 MHz 1.0 5.0 - 500 MHz 2.0 Insertion Loss dB 4.0 - 700 MHz 3.0 700 - 1000 MHz 4.5 2.0 - 300 MHz 0.3 Amplitude Unbalance dB 300 - 1000 MHz 2.0 2.0 - 300 MHz 5 Phase Unbalance Degrees 300 - 1000 MHz 20 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MABA-007569-ETK42T 1:4 E-Series RF Transmission Line Step-up Transformer Rev. V3 2 - 1000 MHz Typical Performance Curves: Freq. = 2 - 1000 MHz, T = 25C, Z = 50 A 0 Temperature data available on request 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: