MADR-010410 Module Driver Rev. V2 6-bit Serial/Parallel, Transmit/Receive Features Pin Configuration CMOS or LVCMOS Control Logic Pin No. Function Pin No. Function Negative output voltage for GaAs Gate Drive 1 B2 21 NC 6-bit Serial/Parallel Driver for Attenuator or Phase Shifter Control 2 A2 22 NC T/R Switch and Amplifier Controls 3 B1 23 NC Low Power Dissipation 4 A1 24 NC Lead-Free 5mm PQFN-40LD Plastic Package RoHS* Compliant and 260C Reflow Compatible 5 V 25 GND EE 6 V 26 NC CC 7 S/P 27 P2 Description The MADR-010410 is a dedicated CMOS driver for 8 NC 28 P1 multifunction modules such as GaAs based 9 NC 29 L2 Transmit/Receive Modules. The driver translates 10 NC 30 L1 CMOS/LVCMOS input controls to negative gate control voltages for GaAs FETs. 11 C1/SER IN 31 B7 12 C2/CLK 32 A7 The driver includes a 6-bit serial/parallel interface designed to drive digital attenuators and/or phase 13 C3/LE 33 B6 shifters as well as functionality to switch between 14 C4 34 A6 transmit and receive channels allowing the ability to 15 C5 35 B5 enable/disable LNAs or PAs. High speed analog CMOS technology is utilized to achieve low power 16 C6 36 A5 consumption at moderate to high speeds. 17 TR 37 B4 18 ENABLE 38 A4 19 SER OUT 39 B3 1 Ordering Information 20 NC 40 A3 Part Number Package MADR-010410-000100 Bulk Packaging Handling Procedures MADR-010410-TR0500 500 piece reel Please observe the following precautions to avoid damage: 1. Reference Application Note M513 for reel size information. Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MADR-010410 Module Driver Rev. V2 6-bit Serial/Parallel, Transmit/Receive 2,3,4 Guaranteed Operating Ranges Parameter Unit Min. Typ. Max. Positive DC Supply Voltage V 3.0 5.0 5.5 Negative DC Supply Voltage V -5.5 -5.0 -3.0 Operating Temperature C -40 +25 +125 2. Unused logic inputs must be tied to either GND or V . CC 3. All voltages are relative to GND. 4. 0.01 F decoupling capacitors are required on the power supply lines. DC Characteristics over Guaranteed Operating Range Parameter Test Conditions Unit Min. Typ. Max. Input High Voltage Guaranteed High Input Voltage V 0.7xV V V CC CC CC Input Low Voltage Guaranteed Low Input Voltage V GND GND 0.3xV CC Output High Voltage (An or Bn) I = -250 A V -0.1 OH Output Low Voltage (An or Bn) I = 250 A V V + 0.1 OL EE DC Output CurrentHigh (per Output) V = -5.0V mA -1 EE DC Output CurrentLow (per Output) V = -5.0V mA 1 EE Output High for Serial Out I = -100 A V V - 0.2 V OH CC CC Output Low for Serial Out I = 100 A V GND 0.2 OL Output Current High for Serial Out V = 5.0V, V = -5.0V mA -1 CC EE Output Current Low for Serial Out V = 5.0V, V = -5.0V mA 1 CC EE Quiescent Supply Current V = GND or V , No Output Load A 0.1 5 IN CC Quiescent Supply Current V = GND or V , No Output Load A 0.1 5 IN EE Input Leakage Current V = GND or V A -1 1 IN CC L,P Ports Open-Drain Output Resistance V = -5.0V or -3.0V, I = 0.5mA 40 200 EE SINK 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: