MADS-011010-14150T

MADS-011010-14150T Schottky Limiter Rev. V1 DC - 6 GHz Features Functional Schematic 3 Terminal LPF Broadband Shunt Structure Low Slope Resistance, 7 +30 dBm Peak and CW Power Handling 0.6 dB Shunt Insertion Loss N/C 6 1 N/C +20 dBm Flat Leakage Power Lead-Free 1.5 x 1.2 mm 6-lead TDFN Package o RoHS* Compliant and 260 C Reflow Compatible 2 5 RF RF IN OUT Description N/C 3 4 N/C The MADS-011010 is a Schottky limiter assembled 7 GND in a lead-free 1.5 x 1.2 mm TDFN surface mount plastic package. This device provides broadband Top view performance as well as exceptional lower flat leakage power. 3 Pin Configuration The MADS-011010 is ideally suitable for higher frequency and lower flat leakage limiter applications Pin No. Pin Name Description where higher performance surface mount diode assemblies are required. 1 N/C No Connection 2 RF RF Input IN 3 N/C No Connection 1,2 Ordering Information 4 N/C No Connection Part Number Package 5 RF RF Output OUT MADS-011010-14150T 3000 piece reel 6 N/C No Connection MADS-011010-000SMB Sample board 4 7 Paddle Ground 1. Reference Application Note M513 for reel size information. 2. All RF Sample boards include 5 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC, and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 India Tel: +91.80.43537383 China Tel: +86.21.2407.1588 MADS-011010-14150T Schottky Limiter Rev. V1 DC - 6 GHz Electrical Specifications: T = +25C, Z = 50 (unless otherwise defined) A 0 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss P = -20 dBm 1.25 GHz dB 0.5 0.75 IN P1dB Input Compression Power 1 GHz dBm -2 5 Peak & CW Incident Power 1 s, 0.1% duty 1 GHz dBm +30 6 Flat Leakage Power +30 dBm, 1 s, 0.1% duty 1 GHz dBm +22 6 Spike Leakage Power +30 dBm, 1 s, 0.1% duty 1 GHz dBm +22 6 Spike Leakage Energy +30 dBm, 1 s, 0.1% duty 1 GHz ergs 0.01 6 Recovery Time +30 dBm, 1 s, 0.1% duty 1 GHz ns 50 (1 dB of Insertion Loss) 6 Input 3rd Order P = -20 dBm, IN dBm +15 Intermodulation Products F1 = 1.000 GHz, F2 = 1.010 GHz Forward Voltage (Vf) Vf 1 mA mV 100 Voltage Breakdown (Vb) Vb 1 mA V 3 Slope Resistance (Rd) Rd 9.5 10.5 mA Ohms 7 Capacitance (Ct) Ct -0.5 volts pF 0.34 5. Both Source and Load VSWR <1.2:1 at Peak and CW Incident Power. 6. High power output parameters are tested with RF evaluation board component values defined on PCB schematic, pg 4. 7,8 Absolute Maximum Ratings Parameter Absolute Maximum Handling Procedures Peak & CW Incident Power Please observe the following precautions to avoid +27 dBm 1 s pulse, 0.1% duty +85C damage: Junction Temperature 175C Static Sensitivity These devices are sensitive to electrostatic Operating Temperature -65C to +125C discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should Storage Temperature -65C to +150C be used when handling these Class 0 devices. 7. Exceeding any one or combination of these limits may cause permanent damage to this device. 8. MACOM does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 India Tel: +91.80.43537383 China Tel: +86.21.2407.1588