SP2T PIN Diode Switch MSW203x-203 Rev. V2 Features Wide Frequency Range: 50 MHz to 6 GHz, in 3 bands Surface Mount SP2T Switch in Compact Outline: 8 mm L x 5 mm W x 2.5 mm H Higher Average Power Handling than Plastic Packaged MMIC Switches: 100 W CW High RF Peak Power: 500 W CS203 Low Insertion Loss: 0.25 dB High IIP3: 65 dBm Functional Schematic Operates From Positive Voltage Only: 5 V & 28 V to 125 V J0 RoHS* Compliant Applications J1 J2 High Power Transmit / Receive Switching Active Receiver Protection B1 B2 Description The MSW203x-203 series of surface mount silicon PIN diode SP2T switches handle high power signals from 50 MHz to 1 GHz (MSW2030), 400 MHz to 4 GHz (MSW2031) and 2 to 6 GHz (MSW2032), in transmit-receive (TR), active receiver protection and other applications. This series is manufactured using a proven hybrid manufacturing process incorporating Ordering Information high voltage PIN diodes and passive devices integrated within a ceramic substrate. These low profile, compact, surface mount components, offer MSW2030-203-T tube superior small and large signal performance superior to that of MMIC devices in QFN packages. The MSW2030-203-R 250 or 500 piece reel SP2T switches are designed in an asymmetrical topology to minimize Tx-Ant loss and maximize Tx- MSW2030-203-W Waffle pack Rx isolation performance. The very low thermal MSW2031-203-T tube resistance (<25C/W) of the PIN diodes in these MSW2031-203-R 250 or 500 piece reel devices enables them to reliably handle RF incident power levels of 50 dBm CW and RF peak incident MSW2031-203-W Waffle pack power levels of 57 dBm in cold switching MSW2032-203-T tube applications at T = 85C. The thick I-layers of the A PIN diodes (>100 m), coupled with their long MSW2032-203-R 250 or 500 piece reel minority carrier lifetime,(>2 s), provides input third order intercept point (IIP3) greater than 65 dBm. MSW2032-203-W Waffle pack MSW2030-203-E RF evaluation board These MSW203x-203 series SP2T switches are designed to be used in high average and peak MSW2031-203-E RF evaluation board power switch applications, operating from 50 MHz to MSW2032-203-E RF evaluation board 6 GHz in three bands, which utilize high volume, surface mount, solder re-flow manufacturing. These products are durable and capable of reliably operating in military, commercial, and industrial * Restrictions on Hazardous Substances, compliant to current environments. RoHS EU directive. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: h t t p s: //www.m a co m .co m /su p p o rt DC-0011342 SP2T PIN Diode Switch MSW203x-203 Rev. V2 MSW2030-203 Electrical Specifications: T = +25C, P = 0 dBm, Z = 50 A IN 0 Frequency MHz 50 1000 bias state 1: port J0 to J1 Insertion Loss dB 0.3 0.4 bias state 2: port J0 to J2 bias state 1: port J0 to J1 Return Loss dB 20 22 bias state 2: port J0 to J2 bias state 1: port J0 to J1 Isolation dB 50 52 bias state 2: port J0 to J2 1 CW Incident Power source & load VSWR = 1.5:1 dBm 50 51 source & load VSWR = 1.5:1 1 Peak Incident Power dBm 57 pulse width = 10 s, duty cycle = 1% 10% - 90% RF Voltage, 2 Switching Time s 2 3 TTL rep rate = 100 F1 = 500 MHz, F2 = 510 MHz, P1=P2=10 dBm Input IP3 dBm 60 65 measured on path biased to low loss state MSW2031-203 Electrical Specifications: T = +25C, P = 0 dBm, Z = 50 A IN 0 Frequency MHz 400 4000 bias state 1: port J0 to J1 Insertion Loss dB 0.5 0.6 bias state 2: port J0 to J2 bias state 1: port J0 to J1 Return Loss dB 14 16 bias state 2: port J0 to J2 bias state 1: port J0 to J1 Isolation dB 32 35 bias state 2: port J0 to J2 1 CW Incident Power source & load VSWR = 1.5:1 dBm 50 51 1 source & load VSWR = 1.5:1 Peak Incident Power dBm 57 pulse width = 10 s, duty cycle = 1% 10% - 90% RF Voltage, 2 Switching Time s 1 2 TTL rep rate = 100 F1 = 1000 MHz, F2 = 1010 MHz, P1=P2=10 dBm Input IP3 dBm 60 65 measured on path biased to low loss state Continued 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: h t t p s: //www.m a co m .co m /su p p o rt DC-0011342