75W Single Output Industrial DIN Rail Power Supply DR-75 series 6 - 5 0 1 6 ( 7 -8 1 0 1 0 0 ( 1 0 ( 0 9: 8* 1, 5 <2 . 4 0 /9 & = * 6 > & ( . % & Bauartgepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL DR-75-12 DR-75-24 DR-75-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 6.3A 3.2A 1.6A CURRENT RANGE 0 ~ 6.3A 0 ~ 3.2A 0 ~ 1.6A RATED POWER 76W 76.8W 76.8W RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 240mVp-p OUTPUT VOLTAGE ADJ. RANGE 12 ~ 14V 24 ~ 28V 48 ~ 53V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% SETUP, RISE TIME 1000ms, 60ms/230VAC 1800ms, 60ms/115VAC at full load HOLD UP TIME (Typ.) 60ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 76% 80% 81% INPUT AC CURRENT (Typ.) 1.6A/115V 0.96A/230V INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 15 ~ 16.5V 29 ~ 34V 58 ~ 65V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 855 (TSW1) detect on heat sink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -10 ~ +60 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -20 ~ +85, 10 ~ 95% RH STORAGE TEMP., HUMIDITY ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Mounting: Compliance to IEC60068-2-6 SAFETY STANDARDS UL508, TUV EN60950-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55011,EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020 MTBF 123.1K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 55.5*125.2*100mm (W*H*D) 0.6Kg 20pcs/13Kg/1.29CUFT PACKING NOTE % & ( ) & *& & +, - ( ( + & & & * / 0 ( 1 & 1 & ( ( 23 4 File Name:DR-75-SPEC 2018-01-1235 75W Single Output Industrial DIN Rail Power Supply DR-75 series Mechanical Specification Case No. 923 Unit:mm 125.2 +V ADJ. TB2 TB1 1 1 2 2 3 3 4 LED Terminal Pin No. Assignment (TB1) Pin No. Assignment 1 FG 2 AC/N(DC+) 3 AC/L(DC-) ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 Terminal Pin No. Assignment (TB2) Pin No. Assignment 1,2 DC OUTPUT +V 3,4 DC OUTPUT -V Block Diagram fosc : 50KHz RECTIFIERS RECTIFIERS EMI POWER +V I/P & & SWITCHING FILTER -V FILTER FILTER DETECTION CIRCUIT FG O.L.P. PWM CONTROL O.T.P. O.V.P. Output Derating Output Derating Vs Input Voltage 100 100 24V,48V 90 80 12V 80 70 60 60 40 50 20 40 -10 0102030455060 (VERTICAL) 85 90 105 125 145 165 185 205 225 245 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:DR-75-SPEC 2018-01-12 LOAD (%) 55.5 LOAD (%) 100