35W Constant Power MODE Linear LED Driver LDC-35 series S&E 05 < *, /,= 3 / / 4 / / 5 // 3 6 - 2 / 7 / 35 5/ + 5 9 / (, 8 : / / (/ 5 < => . *, / / / / % /, , , %& ( ) ( * + , -. / . (/ % 0 1 . / . / / 2 ( / , / , 5 *, 5 9 7/ + 9 + 7 < 3 4 / = + . + File Name:LDC-35-SPEC 2018-02-0235W Constant Power MODE Linear LED Driver LDC-35 series SPECIFICATION MODEL LDC-35 OUTPUT CURRENT REGION 300 ~ 1000mA(300mA default) RATED POWER Note.2 35W CONSTANT CURRENT REGION Note.2 27 ~ 56V FULL POWER CURRENT RANGE 625 ~ 1000mA OUTPUT OPEN CIRCUIT VOLTAGE(max.) 60V LOW FREQUENCY 3.0% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 5.0% 500ms/230VAC SET UP TIME Note.4 180 ~ 295VAC 254 ~ 420VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.95/230VAC load 50% PF0.92/277VAC load 75% POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 10%( load50%/230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 88%(230VAC Full load) AC CURRENT (Typ.) 0.2A / 230VAC 0.16A / 277VAC INRUSH CURRENT(Typ.) COLD START 30A(twidth=250 s measured at 50% Ipeak)/230VAC Per NEMA 410 MAX. No. of PSUs on 16A 17 units (circuit breaker of type B) / 29 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC Hiccup mode or constant current limiting ,recovers automatically after fault condition is removed SHORT CIRCUIT 61 ~ 80V PROTECTION OVER VOLTAGE Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, with auto-recovery DIMMING Please refer toDIMMING OPERATIONsection FUNCTION By external NTC, please refer toTEMPERATURE COMPENSATION OPERATION section TEMP. COMPENSATION WORKING TEMP. Tcase=-25 ~ +80 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+80 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.13-12 ENEC EN61347-1, EN61347-2-13, EN62384 GB19510.14,GB19510.1 approved SAFETY STANDARDS Note.5 DALI STANDARDS Compliance to IEC62386-101.102.207 for DA-Type only WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EMC EMISSION Note.5 EN55015,EN61000-3-2 Class C ( load50%) EN61000-3-3 GB/T17743,GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Earth:2KV,Line-Line:1KV) criteria A EMC IMMUNITY MTBF 1097K hrs min. Telcordia SR-332 (Bellcore) 286Khrs min. MIL-HDBK-217F (25) DIMENSION 280*30*21mm (L*W*H) OTHERS 0.22Kg 54pcs/12.88Kg/0.91CUFT PACKING // 9:* //, % . % ( NOTE % 3/ A :B*3B* B 9* ** 9CA ,( / / 3/ D * * E * * F / G / * :9 :55 /, ,/ * //( ( / 1 4 // ( (, / // . / 1 1 / , 4 / // H * , // 2 , * . / /, < *43. =. ( 6 / 6 3/ , 4 9 I ( // * ( / / / / % <H = File Name:LDC-35-SPEC 2018-02-02