80W Constant Power MODE Linear LED Driver LDC-80 series S&E 05 < *, /,= 3 / / 4 / / 5 // 3 ) - 2 / 6 / 35 5/ + 5 8 / , 7 % 9 / / / 5 : < => . *, / / % & / / /, % , , %& ( ) * + , -. / . / 0 % 1 . / . / / 2 / , / , 5 *, 5 8 6/ + 8 + 6 < & & 3 4 / = + . + File Name:LDC-80-SPEC 2018-02-0280W Constant Power MODE Linear LED Driver LDC-80 series SPECIFICATION MODEL LDC-80 OUTPUT CURRENT REGION 700 ~ 2100mA(700mA default) RATED POWER Note.2 80W CONSTANT CURRENT REGION Note.2 27 ~ 56V FULL POWER CURRENT RANGE 1400 ~ 2100mA OPEN CIRCUIT VOLTAGE(max.) 60V OUTPUT LOW FREQUENCY 3.0% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 5.0% 500ms/230VAC SET UP TIME Note.4 180 ~ 295VAC 254 ~ 420VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.95/230VAC load 50% PF0.92/277VAC load 75% POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 10%( load50%/230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 90%(230VAC Full load) AC CURRENT (Typ.) 0.48A / 230VAC 0.36A/277VAC INRUSH CURRENT(Typ.) COLD START 55A(twidth=300 s measured at 50% Ipeak)/230VAC Per NEMA 410 MAX. No. of PSUs on 16A 6 units (circuit breaker of type B) / 11 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC Hiccup mode or constant current limiting ,recovers automatically after fault condition is removed SHORT CIRCUIT 61 ~ 80V PROTECTION OVER VOLTAGE Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, with auto-recovery DIMMING Please refer toDIMMING OPERATIONsection FUNCTION By external NTC, please refer toTEMPERATURE COMPENSATION OPERATION section TEMP. COMPENSATION WORKING TEMP. Tcase=-25 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.13-12 ENEC EN61347-1, EN61347-2-13, EN62384 GB19510.14,GB19510.1 approved SAFETY STANDARDS Note.5 DALI STANDARDS Compliance to IEC62386-101.102.207 for DA-Type only WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EMC EMISSION Note.5 EN55015,EN61000-3-2 Class C ( load50%) EN61000-3-3 GB/T17743,GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Earth:2KV,Line-Line:1KV) criteria A EMC IMMUNITY 1065K hrs min. Telcordia SR-332 (Bellcore) 259Khrs min. MIL-HDBK-217F (25) MTBF DIMENSION 360**30 21mm (L*W*H) OTHERS 0.295Kg 40pcs/12.8Kg/0.81CUFT PACKING // 89* //, & . % NOTE 3/ A 9B*3B* B 8* ** 8CA , / / 3/ D * * E * * F / G / * 98 955 /, ,/ % * // / 1 4 // , / // . / 1 1 / , 4 / // H * , // 2 , % * . / /, < *43. =. )% / ) 3/ , 4 8 I : // * % / / % / / <H% = File Name:LDC-80-SPEC 2018-02-02