1N6675UR-1 1N6677UR-1 plus CDLL0.5A20 CDLL0.5A40 Qualified Levels*: JAN, JANTX, 200 and 500 mA Schottky Barrier Rectifier Available on JANTXV and JANS commercial Qualified per MIL-PRF-19500/610 versions DESCRIPTION The 1N6675UR-1 through 1N6677UR-1 series of Schottky barrier rectifiers provides a selection of 200 or 500 mA ratiings in surface mount, hard glass DO-213AA MELF package. The 1N6677UR-1 is also available in JAN, JANTX, JANTXV, and JANS military qualifications. DO-213AA MELF Important: For the latest information, visit our website 1N6675UR-1 1N6677UR-1 plus CDLL0.5A20 CDLL0.5A40 MECHANICAL and PACKAGING CASE: Hermetically sealed glass case package. TERMINALS: Tin/lead plated or RoHS compliant matte-tin (commercial grade only) over copper clad steel. Solderable per MIL- STD-750, method 2026. POLARITY: Cathode end is banded. MOUNTING: The axial coefficient of expansion (COE) of this device is approximately +6PPM/C. The COE of the mounting surface system should be selected to provide a suitable match with this device. MARKING: Part number. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: Approximately 0.04 grams. See Package Dimensions on last page. PART NOMENCLATURE 1N6675UR-1 1N6677UR-1: 1N6675 UR -1 (e3) JEDEC type number RoHS Compliance (see Electrical Characteristics e3 = RoHS compliant table) Blank = non-RoHS compliant MELF Surface Mount Metallurgically Bonded 1N6677UR-1 only: JAN 1N6677 UR -1 (e3) Reliability Level* RoHS Compliance JAN = JAN level e3 = RoHS compliant (on JANTX = JANTX level commercial grade only) JANTXV = JANTXV level Blank = non-RoHS compliant JANS = JANS level Metallurgically Bonded JEDEC type number MELF Surface Mount (see Electrical Characteristics table) CDLL0.5A20 CDLL0.5A40: CDLL 0.2A 20 (e3) Microsemi Designation RoHS Compliance e3 = RoHS compliant Amp Rating Blank = non-RoHS compliant Working Peak Reverse Voltage Rating (V ) RWM T4-LDS-0302-1, Rev. 1 (6/13/13) 2013 Microsemi Corporation Page 2 of 6