AT89C51CC03CA-SLSUM Microchip

Features Protocol CAN Used as Physical Layer 7 ISP CAN Identifiers Relocatable ISP CAN Identifiers Autobaud In-System Programming Read/Write Flash and EEPROM Memories Read Device ID Full-chip Erase Read/Write Configuration Bytes CAN Security Setting From ISP Command Remote Application Start Command Microcontrollers In-Application Programming/Self Programming Read/Write Flash and EEPROM Memories Read Device ID AT89C51CC03 Block Erase Read/Write Configuration Bytes Bootloader Start CAN Bootloader Description This document describes the CAN bootloader functionalities as well as the CAN proto- col to efficiently perform operations on the on-chip Flash (EEPROM) memories. Additional information on the AT89C51CC03 product can be found in the AT89C51CC03 datasheet and the AT89C51CC03 errata sheet available on the Atmel web site. The bootloader software package (source code and binary) currently used for produc- tion is available from the Atmel web site. Bootloader Revision Purpose of Modifications Date Revisions 1.0.0 First release 01/08/2003 Revisions 1.0.1 SBV > 0x7F00 bug fix 15/04/2004 (no doc and specification change) Revision 1.0.4 Improvement of Autobaud detection. 04/01/2006 4251BCAN03/08Functional The AT89C51CC03 Bootloader facilitates In-System Programming and In-Application Programming. Description In-System In-System Programming allows the user to program or reprogram a microcontroller on-chip Flash memory without removing it from the system and without the need of a pre-programmed Programming application. Capability The CAN bootloader can manage a communication with a host through the CAN network. It can also access and perform requested operations on the on-chip Flash Memory. In-Application In-Application Programming (IAP) allows the reprogramming of a microcontroller on-chip Flash memory without removing it from the system and while the embedded application is running. Programming or Self Programming The CAN bootloader contains some Application Programming Interface routines named API rou- Capability tines allowing IAP by using the users firmware. Block Diagram This section describes the different parts of the bootloader. The figure below shows the on-chip bootloader and IAP processes. Figure 1. Bootloader Process Description On Chip External host via the User CAN Protocol Application Communication IAP ISP Communication User Call Management Management Flash Memory Management Flash Memory 2 AT89C51CC03 CAN Bootloader 4251BCAN03/08