Supertex inc. HV7620 40MHz, 32-Channel Serial to Parallel Converter with Push-Pull Outputs Features General Description HVCMOS technology The HV7620 is a low-voltage serial to high-voltage parallel 5.0V logic and 12V supply rail converter with push-pull outputs. This device has been designed Output voltage up to +200V for use as a driver for color AC plasma displays. Low power level shifting Source/sink current minimum 50mA The device has 4 parallel 8-bit shift registers permitting data rates 40MHz equivalent data rate four times the speed of one. The data is clocked in simultaneously Latched data outputs on all four data inputs with a single clock. Data is shifted in on a Forward and reverse shifting options (DIR pin) low to high transition of the clock. The latches and control logic Chip select perform the output enable function. Polarity function The DIR pin causes clockwise (CW) shifting of the data when connected to VDD1, and counterclockwise (CCW) shifting when connected to LVGND. Operation of the shift register is not affected by the LE (latch enable) input. Transfer of data from the shift registers to the latches occurs when the LE input is high. Data is stored in the latches when LE is low. The current source on the logic inputs provides active pull up when the input pins are open. Functional Block Diagram LE BLA CS POL D A IN D A OUT HV A1 OUT QA1 HV B1 CLK 8-Bit OUT 8-Bit Shift Latches Register HV C1 8 OUT QA8 HV D1 OUT D B BLB IN D B OUT QB1 8-Bit 8-Bit Shift Latches Register 8 DIR QB8 D C BLC IN D C OUT QC1 8-Bit 8-Bit Shift Latches Register 8 QC8 D D IN BLD HV A8 OUT D D OUT HV B8 QD1 OUT 8-Bit HV C8 8-Bit OUT Shift Latches Register 8 HV D8 OUT QD8 Doc. DSFP-HV7620 Supertex inc. C112213 www.supertex.comHV7620 Ordering Information / Availability Pin Configuration 64 Part Number Package Option Packing HV7620PG-G 64-Lead PQFP (3-sided) 66/tray -G denotes a lead (Pb)-free / RoHS compliant package 1 Absolute Maximum Ratings 64-Lead PQFP (3-sided) Parameter Value (top view) Supply voltage, V -0.5V to +14V DD1 Product Marking Supply voltage, V -0.5V to +14V DD2 L = Lot Number Supply voltage, V -0.5V to +225V Top Marking PP YY = Year Sealed HV7620PG Logic input levels -2.0V to V + 2.0V WW = Week Sealed DD1 LLLLLLLLLL YYWW C = Country of Origin 1 CCCCCCCC AAA Continuous total power dissipation 1200mW A = Assembler ID = Green Packaging Operating temperature range -40C to +85C Package may or may not include the following marks: Si or Storage temperature range -65C to +150C 64-Lead PQFP (3-sided) Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Typical Thermal Resistance Notes: Package ja 1. For operation above 25C ambient derate linearly to maximum operating temperature at 20mW/C. O 64-Lead PQFP 41 C/W Recommended Operating Conditions Sym Parameter Min Max Units V Logic supply voltage 4.5 V V DD1 DD2 V 12V supply voltage 10.8 13.2 V DD2 V High voltage supply voltage 50 200 V PP V High-level input voltage V -0.5V V V IH DD1 DD1 V Low-level input voltage 0 0.5 V IL V = 5.0V - 10 MHz DD1 f Clock frequency CLK V = 12V - 5 MHz DD1 T Operating temperature range -40 +85 C A 1 I Allowable pulsed current through output diodes - 500 mA OD 1 I Allowable pulsed V or HVGND current - 16 A GND(VPP) PP V Slew rate of V - 340 V/s PP(SLEW) PP Notes: 1. The current pulse width = 500ns, duty cycle = 5%. Doc. DSFP-HV7620 Supertex inc. C112213 2 www.supertex.com