MCP14A0302T-E/SN Microchip

MCP14A0301/2 3.0A MOSFET Driver with Low Threshold Input and Enable Features General Description High Peak Output Current: 3.0A (typical) The MCP14A0301/2 devices are high-speed MOSFET drivers that are capable of providing up to 3.0A of peak Wide Input Supply Voltage Operating Range: current while operating from a single 4.5V to 18V - 4.5V to 18V supply. There are two output configurations available Low Shoot-Through/Cross-Conduction Current in inverting (MCP14A0301) and noninverting Output Stage (MCP14A0302). These devices feature low shoot- High Capacitive Load Drive Capability: through current, fast rise and fall times, and short - 1800 pF in 13 ns (typical) propagation delays, which make them ideal for high switching frequency applications. Short Delay Times: 15 ns (t ), 18 ns (t ) (typical) D1 D2 Low Supply Current: 360 A (typical) The MCP14A0301/2 family of devices offers enhanced control with Enable functionality. The active-high Low-Voltage Threshold Input and Enable with Enable pin can be driven low to drive the output of the Hysteresis MCP14A0301/2 low, regardless of the status of the Latch-Up Protected: Withstands 500 mA Reverse Input pin. An integrated pull-up resistor allows the user Current to leave the Enable pin floating for standard operation. Space-Saving Packages: These devices are highly latch-up resistant under any - 8-Lead MSOP condition within their power and voltage ratings. They - 8-Lead SOIC can accept up to 500 mA of reverse current being - 8-Lead 2 x 2 WDFN forced back into their outputs without damage or logic upset. All terminals are fully protected against Applications electrostatic discharge (ESD) up to 2 kV (HBM) and 200V (MM). Switch Mode Power Supplies Pulse Transformer Drive Package Types Line Drivers MCP14A0301 MCP14A0302 Level Translator MSOP/SOIC MSOP/SOIC Motor and Solenoid Drive VDD VDD 1 8 VDD VDD 1 8 IN OUT IN OUT 2 7 2 7 EN 3 6 OUT EN 3 6 OUT 4 5 GND GND GND 4 5 GND MCP14A0301 MCP14A0302 2x2 WDFN* 2x2 WDFN* VDD VDD VDD VDD 1 8 1 8 IN OUT IN OUT 2 7 2 7 EP* EP* 9 9 3 6 EN OUT EN 3 6 OUT 4 5 4 5 GND GND GND GND * Includes Exposed Thermal Pad (EP) see Table 3-1. 2017 Microchip Technology Inc. DS20005807A-page 1MCP14A0301/2 Functional Block Diagram V DD Internal Pull-Up Enable V REF Inverting GND Output V DD Input Non-Inverting V REF GND MCP14A0301 Inverting MCP14A0302 Non-Inverting DS20005807A-page 2 2017 Microchip Technology Inc.