MCP6021-EST

MCP6021/1R/2/3/4 Rail-to-Rail Input/Output, 10 MHz Op Amps Features Description Rail-to-Rail Input/Output The MCP6021, MCP6021R, MCP6022, MCP6023 and MCP6024 from Microchip Technology Inc. are rail-to- Wide Bandwidth: 10 MHz (typ.) rail input and output op amps with high performance. Low Noise: 8.7 nV/Hz, at 10 kHz (typ.) Key specifications include: wide bandwidth (10 MHz), Low Offset Voltage: low noise (8.7 nV/Hz), low input offset voltage and low - Industrial Temperature: 500 V (max.) distortion (0.00053% THD+N). The MCP6023 also - Extended Temperature: 250 V (max.) offers a Chip Select pin (CS) that gives power savings when the part is not in use. Mid-Supply V : MCP6021 and MCP6023 REF Low Supply Current: 1 mA (typ.) The single MCP6021 and MCP6021R are available in SOT-23-5. The single MCP6021, single MCP6023 and Total Harmonic Distortion: 0.00053% (typ., G = 1) dual MCP6022 are available in 8-lead PDIP, SOIC and Unity Gain Stable TSSOP. The Extended Temperature single MCP6021 Power Supply Range: 2.5V to 5.5V is available in 8-lead MSOP. The quad MCP6024 is Temperature Range: offered in 14-lead PDIP, SOIC and TSSOP packages. - Industrial: -40C to +85C The MCP6021/1R/2/3/4 family is available in Industrial - Extended: -40C to +125C and Extended temperature ranges. It has a power supply range of 2.5V to 5.5V. Typical Applications Package Types Automotive Driving A/D Converters MCP6021 MCP6022 SOT-23-5 PDIP SOIC, TSSOP Multi-Pole Active Filters Barcode Scanners V V V 1 V 1 5 8 OUT DD OUTA DD Audio Processing V V V 2 2 7 SS INA OUTB Communications V + V V + 3 4 V 3 6 INA INB IN IN DAC Buffer V 5 V + 4 SS INB MCP6021R Test Equipment SOT-23-5 MCP6023 Medical Instrumentation PDIP SOIC, TSSOP V 1 V 5 OUT SS Available Tools NC 1 8 CS V 2 DD V V SPICE Macro Model (at www.microchip.com) V + IN 2 7 4 V IN 3 DD IN FilterLab software (at www.microchip.com) V + 3 6 V IN OUT MCP6021 V 4 V SS 5 REF PDIP SOIC, Typical Application MCP6024 MSOP, TSSOP 5.6 pF PDIP SOIC, TSSOP Photo NC 1 NC 8 Detector V V 1 14 OUTA OUTD V 2 V 7 IN DD 100 k V V 2 13 INA IND V + 6 V 3 IN OUT V + V + 3 12 INA IND V V 100 pF 4 5 SS REF V V 4 11 DD SS V + V + 5 10 INB INC MCP6021 V V INB 6 9 INC V /2 DD V V OUTB 7 8 OUTC Transimpedance Amplifier 2006 Microchip Technology Inc. DS21685C-page 1MCP6021/1R/2/3/4 Notice: Stresses above those listed under Absolute 1.0 ELECTRICAL Maximum Ratings may cause permanent damage to the CHARACTERISTICS device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not Absolute Maximum Ratings implied. Exposure to maximum rating conditions for extended V V ........................................................................7.0V periods may affect device reliability. DD SS All Inputs and Outputs.................... V 0.3V to V +0.3V SS DD Difference Input Voltage ...................................... V V DD SS Output Short Circuit Current ..................................continuous Current at Input Pins ....................................................2 mA Current at Output and Supply Pins ............................30 mA Storage Temperature.....................................-65C to +150C Junction Temperature..................................................+150C ESD Protection on all pins (HBM MM)................ 2 kV 200V DC ELECTRICAL CHARACTERISTICS Electrical Specifications: Unless otherwise indicated, T = +25C, V = +2.5V to +5.5V, V = GND, V = V /2, V V /2 A DD SS CM DD OUT DD and R =10 k to V /2. L DD Parameters Sym Min Typ Max Units Conditions Input Offset Input Offset Voltage: Industrial Temperature Parts V -500 +500 V V = 0V OS CM Extended Temperature Parts V -250 +250 V V = 0V, V = 5.0V OS CM DD Extended Temperature Parts V -2.5 +2.5 mV V = 0V, V = 5.0V OS CM DD T = -40C to +125C A Input Offset Voltage Temperature Drift V /T 3.5 V/CT = -40C to +125C OS A A Power Supply Rejection Ratio PSRR 74 90 dB V = 0V CM Input Current and Impedance Input Bias Current I 1 pA B Industrial Temperature Parts I 30 150 pA T = +85C B A Extended Temperature Parts I 640 5,000 pA T = +125C B A Input Offset Current I 1 pA OS 13 Common-Mode Input Impedance Z 10 6 pF CM 13 Differential Input Impedance Z 10 3 pF DIFF Common-Mode Common-Mode Input Range V V -0.3 V +0.3 V CMR SS DD Common-Mode Rejection Ratio CMRR 74 90 dB V = 5V, V = -0.3V to 5.3V DD CM CMRR 70 85 dB V = 5V, V = 3.0V to 5.3V DD CM CMRR 74 90 dB V = 5V, V = -0.3V to 3.0V DD CM Voltage Reference (MCP6021 and MCP6023 only) V Accuracy (V V /2) V -50 +50 mV REF REF DD REF ACC V Temperature Drift V /T 100 V/C T = -40C to +125C REF REF A A Open-Loop Gain DC Open-Loop Gain (Large Signal) A 90 110 dB V = 0V, OL CM V = V +0.3V to V -0.3V OUT SS DD Output Maximum Output Voltage Swing V , V V +15 V -20 mV 0.5V output overdrive OL OH SS DD Output Short Circuit Current I 30 mAV = 2.5V SC DD I 22 mAV = 5.5V SC DD Power Supply Supply Voltage V 2.5 5.5 V S Quiescent Current per Amplifier I 0.5 1.0 1.35 mA I = 0 Q O DS21685C-page 2 2006 Microchip Technology Inc.