MCP6231T-EMC Microchip

++ + MCP6231/1R/1U/2/4 20 A, 300 kHz Rail-to-Rail Op Amp Features Description Gain Bandwidth Product: 300 kHz (typical) The Microchip Technology Inc. MCP6231/1R/1U/2/4 operational amplifiers (op amps) provide wide Supply Current: I = 20 A (typical) Q bandwidth for the quiescent current. The MCP6231/1R/ Supply Voltage: 1.8V to 6.0V 1U/2/4 family has a 300 kHz gain bandwidth product Rail-to-Rail Input/Output and 65C (typical) phase margin. This family operates Extended Temperature Range: -40C to +125C from a single supply voltage as low as 1.8V, while Available in 5-Pin SC-70 and SOT-23 packages drawing 20 A (typical) quiescent current. In addition, the MCP6231/1R/1U/2/4 family supports rail-to-rail input and output swing, with a common mode input Applications voltage range of V +300mV to V 300mV. DD SS Automotive These op amps are designed in one of Microchips Portable Equipment advanced CMOS processes. Transimpedance amplifiers Package Types Analog Filters Notebooks and PDAs MCP6231 MCP6231 Battery-Powered Systems MSOP, PDIP, SOIC SOT-23-5 NC 1 8 NC VV VV OUOUTT 11 55 DDDD Design Aids V V 2 7 DD VV IN 22 SSSS SPICE Macro Models + V + 3 6 V IN OUT V + V 33 44 IN IN Software FilterLab V 4 5 NC SS Mindi Circuit Designer & Simulator MCP6231R MCP6232 Microchip Advanced Part Selector (MAPS) SOT-23-5 MSOP, PDIP, SOIC Analog Demonstration and Evaluation Boards V V V V 5 OUTA 1 8 OUT 1 SS DD Application Notes V V DD 2 2 - 7 V INA + OUTB V + V V + 3 6 Typical Application IN 3 4 IN + - INA V INB V 4 5 SS V + INB R G2 V IN2 MCP6231U MCP6234 R G1 SC-70-5, SOT-23-5 PDIP, SOIC, TSSOP V IN1 R F V + V V 1 14 V IN 1 5 DD OUTA OUTD V V V 2 - + + - 13 V 2 DD SS INA IND V + 3 12 V + V 4 V 3 INA IND IN OUT R X MCP6231 V OUT V V 4 11 DD SS + MCP6231 V + 5 10 V + INB INC R Y R Z DFN - + - + V 6 9 V INB INC NC 1 8 NC V 8 V 7 OUTB OUTC V V 2 7 DD IN V + 3 6 V IN OUT V Summing Amplifier Circuit 4 5 NC SS 2008 Microchip Technology Inc. DS21881D-page 1 +MCP6231/1R/1U/2/4 Notice: Stresses above those listed under Absolute 1.0 ELECTRICAL Maximum Ratings may cause permanent damage to the CHARACTERISTICS device. This is a stress rating only and functional operation of the device at those or any other conditions above those Absolute Maximum Ratings indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended V V ........................................................................7.0V DD SS periods may affect device reliability. Current at Analog Input Pins (V +, V ).....................2 mA IN IN See Section 4.1.2 Input Voltage and Current Limits. Analog Inputs (V +, V ) ........ V 1.0VtoV +1.0V IN IN SS DD All Other Inputs and Outputs ......... V 0.3V to V +0.3V SS DD Difference Input Voltage ...................................... V V DD SS Output Short Circuit Current .................................Continuous Current at Output and Supply Pins ............................30 mA Storage Temperature....................................65C to +150C Maximum Junction Temperature (T )..........................+150C J ESD Protection On All Pins (HBM MM) .............. 4 kV 300V DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: Unless otherwise indicated, T = +25C, V = +1.8V to +5.5V, V = GND, V = V /2, A DD SS CM DD R = 100 k to V /2 and V V /2. L DD OUT DD Sym Min Typ Max Units Conditions Parameters Input Offset Input Offset Voltage V -5.0 +5.0 mV V = V OS CM SS Extended Temperature V -7.0 +7.0 mV T = -40C to +125C, OS A V = V (Note) CM SS Input Offset Drift with Temperature V /T 3.0 V/CT = -40C to +125C, OS A A V = V CM SS Power Supply Rejection Ratio PSRR 83 dB V = V CM SS Input Bias Current and Impedance Input Bias Current: I 1.0 pA B At Temperature I 20 pAT = +85C B A At Temperature I 1100 pA T = +125C B A Input Offset Current I 1.0 pA OS 13 Common Mode Input Impedance Z 10 6 pF CM 13 Differential Input Impedance Z 10 3 pF DIFF Common Mode Common Mode Input Range V V 0.3 V + 0.3 V CMR SS DD Common Mode Rejection Ratio CMRR 61 75 dB V = -0.3V to 5.3V, CM V = 5V DD Open-Loop Gain DC Open-Loop Gain (large signal) A 90 110 dB V = 0.3V to V 0.3V, OL OUT DD V =V CM SS Output Maximum Output Voltage Swing V , V V + 35 V 35 mV R =10 k, 0.5V Input OL OH SS DD L Overdrive Output Short-Circuit Current I 6 mAV = 1.8V SC DD I 23 mAV = 5.5V SC DD Power Supply Supply Voltage V 1.8 6.0 V DD Quiescent Current per Amplifier I 10 20 30 A I = 0, V = V 0.5V Q O CM DD Note 1: The SC-70 package is only tested at +25C. 2: All parts with date codes February 2007 and later have been screened to ensure operation at V = 6.0V. However, the DD other minimum and maximum specifications are measured at 1.8V and 5.5V DS21881D-page 2 2008 Microchip Technology Inc.