MIC5232-2.5YD5-TR Microchip

MIC5232 10mA Ultra-Low Quiescent Current Cap LDO Features Input voltage range: 2.7V to 7.0V General Description A operating current Ultra-low Iq: Only 1.8 The MIC5232 is an ultra-low quiescent current, low- Stable with 0.47F ceramic output capacitor dropout linear regulator that is capable of operating Low dropout voltage of 100mV 10mA from a single-cell lithium ion battery. Consuming only Reverse Battery Protection 1.8A of quiescent current while operating, the MIC5232 is ideal for stand-by applications like High output accuracy: powering real-time clocks or memory in battery +2.0% initial accuracy operated electronics. +3.0% over temperature Logic-Level Enable Input The MIC5232 is capable of providing 10mA of output current and has low output noise, providing a small, Miniature 6-pin 2mm x 2mm MLF package efficient solution ideal for any keep-alive application. Lead-Free Thin SOT-23-5 Package This includes reverse current protection, keeping Tight Load and Line Regulation reverse leakage (V > V ) down to 20nA. OUT IN Applications The MIC5232 is a Cap design, operating with very small ceramic output capacitors for stability, reduction Real-Time Clock Power Supply of required board space and component cost. Stand-by Power Supply SRAM Memory Back-up Supply The MIC5232 is available in fixed output voltages in the miniature 6-pin 2mm x 2mm MLF package and Cellular Telephones and Notebook Computers thin SOT-23-5 package with an operating junction temperature range of -40C to 125C. Typical Application Ground Pin Current vs. Input Voltage MIC5232-1.2YD5 3.0 2.7 V IN V OUT VOUT VIN 1.2V 2.4 3.6V 0.47F 2.1 1F EN ceramic 1.8 1.5 GND 1.2 0.9 V = 1.2V 0.6 OUT I = 100A OUT 0.3 C = 0.47F OUT 1.5 Real-Time Clock Back-up Supply 0 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 INPUT VOLTAGE (V) MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC5232 Ordering Information (2) Part Number Marking Voltage Junction Package Lead Finish (1) Code Temperature Range MIC5232-1.2YD5 ZA12 1.2V 40C to +125C TSOT-23-5 Pb-Free MIC5232-1.8YD5 ZA18 1.8V 40C to +125C TSOT-23-5 Pb-Free MIC5232-2.5YD5 ZA25 2.5V 40C to +125C TSOT-23-5 Pb-Free MIC5232-2.8YD5 ZA28 2.8V 40C to +125C TSOT-23-5 Pb-Free MIC5232-3.3YD5 ZA33 3.3V 40C to +125C TSOT-23-5 Pb-Free (3) MIC5232-1.2YML 12Z 1.2V 40C to +125C 6-Pin 2mm x 2mm MLF Pb-Free (3) MIC5232-1.8YML 18Z 1.8V 40C to +125C 6-Pin 2mm x 2mm MLF Pb-Free (3) MIC5232-2.5YML 25Z 2.5V 40C to +125C 6-Pin 2mm x 2mm MLF Pb-Free (3) MIC5232-2.8YML 28Z 2.8V 40C to +125C 6-Pin 2mm x 2mm MLF Pb-Free (3) MIC5232-3.3YML 33Z 3.3V 40C to +125C 6-Pin 2mm x 2mm MLF Pb-Free Notes: 1. Overbar/Underbar symbol ( / ) may not be to scale. 2. Other voltages available. Contact Micrel Inc. for more details. 3. MLF is a GREEN RoHS compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free June 2012 2 M9999-061812-C