MIC5338-MGYMT-TR Microchip

MIC5338/9 Dual 300mA Cap LDO in 1.6mm x 1.6mm Thin MLF General Description Features The MIC5338/9 is an advanced dual 300mA LDO ideal for 2.5V to 5.5V input voltage range powering general purpose portable devices requiring low Two 300mA outputs output noise and excellent Power Supply Rejection Ratio High output accuracy 2% (PSRR). The MIC5338/9 provides two independently Low quiescent current 70A total controlled, high performance, 300mA LDOs in a tiny 1.6mm x 1.6mm Thin MLF package. Stable with ceramic output capacitors The MIC5338/9 provides two low noise outputs with fast Independent enable pins transient response. Additionally the MIC5338/9 provides Low dropout voltage 220mV at 300mA low quiescent current operation, using only 70A with both Low output noise outputs enabled. The MIC5339 also incorporates an active Thermal shutdown protection discharge feature that pulls down the output of the Current limit protection regulator when the part is disabled. Output discharge circuit MIC5339 The MIC5338/9 is available in fixed output voltages in a lead-free (RoHS compliant) 6-pin 1.6mm x 1.6mm Thin 6-pin 1.6mm x 1.6mm Thin MLF package MLF leadless package. Data sheets and support documentation can be found on Applications Micrels web site at www.micrel.com. Mobile phones Camera phones GPS, PMP, PDAs and handhelds Portable electronics Typical Application Camera Module Power Supply MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC5338/9 Ordering Information (1 (2) Manufacturing Marking Lead Part Number Voltage Junction Package ) (3) Part Number Code Temp. Range Finish 1 MIC5338-3.3/2.8YMT S82 3.3V/2.8V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5338-SMYMT MIC5338-2.8/1.8YMT S83 2.8V/1.8V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5338-MGYMT 1 MIC5338-2.8/1.2YMT S84 2.8V/1.2V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5338-M4YMT 1 MIC5338-1.8/1.2YMT S85 1.8V/1.2V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5338-G4YMT 1 MIC5338-1.2/1.0YMT S86 1.2V/1.0V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5338-4CYMT 1 MIC5339-3.3/2.8YMT* S92 3.3V/2.8V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5339-SMYMT MIC5339-2.8/1.8YMT* S93 2.8V/1.8V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5339-MGYMT 1 MIC5339-2.8/1.2YMT* S94 2.8V/1.2V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5339-M4YMT 1 MIC5339-1.8/1.2YMT* S95 1.8V/1.2V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5339-G4YMT 1 MIC5339-1.2/1.0YMT* S96 1.2V/1.0V 40 to +125C 6-Pin 1.6x1.6 Thin MLF Pb-Free MIC5339-4CYMT Note: 1. Contact Micrel for availability. 2. Thin MLF Pin 1 Identifier= 3. Thin MLF is a GREEN RoHS compliant package. Level finish is NiPdAu. Mold compound is Halogen Free. * MIC5339 offers Auto-Discharge function. Pin Configuration 6-Pin 1.6mm x 1.6mm Thin MLF (MT) Pin Description Pin Number Pin Name Pin Function 1 VIN Supply Input. 2 GND Ground. 3 EN2 Enable Input LDO2. Active High Input. Logic High = On Logic Low = Off Do not leave floating. 4 EN1 Enable Input LDO1. Active High Input. Logic High = On Logic Low = Off Do not leave floating. 5 VOUT2 LDO2 Output. 6 VOUT1 LDO1 Output. EPAD HSPAD Heatsink pad. Connect to ground. M9999-063010-A June 2010 2