MUPT5e3 MUPT48e3 and MUPTB5e3 MUPTB48e3 High-Reliability 5V 48V Powermite1, Surface Mount Screening available in Available reference to Transient Voltage Suppressors MIL-PRF-19500 DESCRIPTION Tested in accordance Microsemis unique and new Powermite MUPT series of transient voltage suppressors feature with the requirements of oxide-passivated chips with high-temperature solder bonds for high surge capability and negligible AEC-Q101 electrical degradation under repeated surge conditions. Both unidirectional and bidirectional configurations are available. In addition to its size advantages, the Powermite package includes a fully metallic bottom (anode) side that eliminates the possibility of solder flux entrapment at assembly and a unique locking tab design serves as an integral heat sink. Its innovative design makes this device fully compatible for use with automatic insertion equipment. Important: For the latest information, visit our website MUPT5e3 MUPT48e3 and MUPTB5e3 MUPTB48e3 MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy compound meeting UL94V-0. TERMINALS: Annealed matte-tin plating over copper and readily solderable per MIL-STD-750, method 2026. MARKING: Anode to TAB 1: T plus the last two digits of part number underlined, e.g. MUPT5e3 is T05, MUPT12e3 is T12 Bipolar: B plus the last two digits of part number underlined, e.g. MUPTB8e3 is B08, MUPTB12e3 is B12, etc. Please note dot suffix (for e3 suffix) POLARITY: Anode to TAB 1 (bottom) as described in marking above and on last page. TAPE & REEL option: Standard per EIA-481-B using 12 mm tape. Consult factory for quantities. WEIGHT: Approximately 0.016 gram. See package dimensions on last page. PART NOMENCLATURE Applicable to unidirectional MUPT5e3 MUPT48e3 only: M UPT 5 R (e3) Reliability Level* RoHS Compliance M e3 = RoHS Compliant MA Blank = non-RoHS Compliant MX MXL Reverse Polarity *(See Hi-Rel Non- Not available in 5V Hermetic Product Portfolio) Rated Standoff Voltage Powermite 5V - 48V Applicable to bidirectional MUPTB5e3 MUPTB48e3 only: M UPT B 5 (e3) Reliability Level* RoHS Compliance M e3 = RoHS Compliant MA Blank = non-RoHS Compliant MX MXL Rated Standoff Voltage *(See Hi-Rel Non- 5V - 48V Hermetic Product Portfolio) Powermite Bi-directional RF01103-1, Rev. B (19/05/17) 2017 Microsemi Corporation Page 2 of 5