UPT5e3 UPT48e3, UPT8Re3 UPT48Re3 and UPTB5e3 UPTB48e3 5V 48V Small Footprint, Surface Mount Available Transient Voltage Suppressors DESCRIPTION Microsemis unique and new Powermite UPT series of transient voltage suppressors feature oxide- passivated chips with high-temperature solder bonds for high surge capability and negligible electrical degradation under repeated surge conditions. Both unidirectional and bidirectional configurations are available. In addition to its size advantages, the Powermite package includes a fully metallic bottom (cathode) side that eliminates the possibility of solder flux entrapment at assembly and a unique locking tab serves as an integral heat sink. Its innovative design makes this device fully compatible for use with automatic insertion equipment. Important: For the latest information, visit our website UPT5e3 UPT48e3, UPT8Re3 UPT48Re3 and UPTB5e3 UPTB48e3 MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy compound meeting UL94V-0. TERMINALS: Annealed matte-tin plating over copper and readily solderable per MIL-STD-750, method 2026. MARKING: Anode to TAB 1: T plus the last two digits of part number underlined, e.g. UPT5e3 is T05, UPT12e3 is T12 Cathode to TAB1: U plus last two digits of part number underlined, e.g. UPT8Re3 is U08, UPT12Re3 is U12 Bipolar: B plus the last two digits of part number underlined, e.g. UPTB8e3 is B08, UPTB12e3 is B12, etc. Please note dot suffix (for e3 suffix) POLARITY: Cathode or anode to TAB 1 (bottom) as described in marking above and on last page. TAPE & REEL option: Standard per EIA-481-B using 12 mm tape. Consult factory for quantities. WEIGHT: Approximately 0.016 gram. See package dimensions on last page. PART NOMENCLATURE Applicable to unidirectional UPT5e3 UPT48e3, UPT8Re3 UPT48Re3 only: UPT 8 R (e3) Powermite RoHS Compliance e3 = RoHS Compliant Rated Standoff Blank = non-RoHS Compliant Voltage Polarity Blank = Anode to Case Bottom R = Cathode to Case Bottom Applicable to bidirectional UPTB5e3 UPTB48e3 only: UPT B 8 (e3) Powermite RoHS Compliance e3 = RoHS Compliant Bi-directional Blank = non-RoHS Compliant Rated Standoff Voltage SYMBOLS & DEFINITIONS Symbol Definition V(BR) Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature VWM range. P Peak Pulse Power: The peak power that can be applied for a specified pulse width and waveform. PP I Standby Current: The maximum current that will flow at the specified voltage and temperature. D I Peak Pulse Current: The peak current that can be applied for a specified pulse width and waveform. PP C Capacitance: The capacitance in picofarads of the TVS as defined 0 volts at a frequency of 1 MHz. RF01103, Rev. B (5/22/17) 2017 Microsemi Corporation Page 2 of 5