USB3280 Hi-Speed USB Device PHY with UTMI Interface Datasheet PRODUCT FEATURES Available in a 36-pin lead-free RoHS compliant (6 x 6 Applications x 0.90mm) QFN package The USB3280 is the ideal companion to any ASIC, SoC Interface compliant with the UTMI specification or FPGA solution designed with a UTMI Hi-Speed USB (60MHz, 8-bit bidirectional interface) device (peripheral) core. Only one required power supply (+3.3V) USB-IF Hi-Speed certified to USB 2.0 electrical The USB3280 is well suited for: specification Cell Phones Supports 480Mbps Hi-Speed (HS) and 12Mbps Full MP3 Players Speed (FS) serial data transmission rates Scanners Integrated 45 and 1.5k termination resistors External Hard Drives reduce external component count Digital Still and Video Cameras Internal short circuit protection of DP and DM lines Portable Media Players On-chip oscillator operates with low cost 24MHz Entertainment Devices crystal Printers Latch-up performance exceeds 150mA per EIA/JESD 78, Class II ESD protection levels of 5kV HBM without external protection devices SYNC and EOP generation on transmit packets and detection on receive packets NRZI encoding and decoding Bit stuffing and unstuffing with error detection Supports the USB suspend state, HS detection, HS Chirp, Reset and Resume Support for all test modes defined in the USB 2.0 specification 55mA Unconfigured Current (typical) - ideal for bus powered applications. 83uA suspend current (typical) - ideal for battery powered applications. o o Industrial Operating Temperature -40 C to +85 C SMSC USB3280 DATASHEET Revision 1.5 (11-15-07) Hi-Speed USB Device PHY with UTMI Interface Datasheet ORDER NUMBER(S): USB3280-AEZG FOR 36-PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE USB3280-AEZG-TR FOR 36-PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) Reel Size is 3000 pieces. 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at