USB3290 Small Footprint Hi-Speed USB 2.0 Device PHY with UTMI Interface Datasheet PRODUCT FEATURES Available in a 40 ball lead-free RoHS compliant Applications (4 x 4 x 0.9mm) VFBGA package The USB3290 is the ideal companion to any ASIC, SoC Interface compliant with the UTMI specification or FPGA solution designed with a UTMI Hi-Speed USB (60MHz, 8-bit bidirectional interface) device (peripheral) core. Only one required power supply (+3.3V) Supports 480Mbps Hi-Speed (HS) and 12Mbps Full The USB3290 is well suited for: Speed (FS) serial data transmission rates Cell Phones Integrated 45 and 1.5k termination resistors MP3 Players reduce external component count Scanners Internal short circuit protection of DP and DM lines External Hard Drives On-chip oscillator operates with low cost 24MHz Digital Still and Video Cameras crystal Portable Media Players Latch-up performance exceeds 150mA per EIA/JESD Entertainment Devices 78, Class II Printers ESD protection levels of 5kV HBM without external protection devices SYNC and EOP generation on transmit packets and detection on receive packets NRZI encoding and decoding Bit stuffing and unstuffing with error detection Supports the USB suspend state, HS detection, HS Chirp, Reset and Resume Support for all test modes defined in the USB 2.0 specification 55mA Unconfigured Current (typical) - ideal for bus powered applications. 83uA suspend current (typical) - ideal for battery powered applications. o o Industrial Operating Temperature -40 C to +85 C SMSC USB3290 DATASHEET Revision 1.5 (11-02-07) Small Footprint Hi-Speed USB 2.0 Device PHY with UTMI Interface Datasheet ORDER NUMBER(S): USB3290-FH FOR 40 BALL, VFBGA LEAD-FREE ROHS COMPLIANT PACKAGE USB3290-FH-TR FOR 40 BALL, VFBGA LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) Reel Size is 4000 pieces. 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at