DC Motor 6 Click PID: MIKROE-4114 DC Motor 6 Click is a PWM chopper type brushed DC motor driver, labeled as TB67H451FNG. This IC includes one channel of motor output block, using a wide range of supply voltages, while delivering reasonably high current to the connected DC motors. Low ON-resistance MOSFETs and a PWM control help the TB67H451FNG exhibit lower heat generation thus efficient motor drive. Furthermore, the TB67H451FNG has two inputs, IN1 and IN2, which allow for selection of the four operation modes forward (clockwise), reverse (counter-clockwise), short brake, and stop modes. DC Motor 6 Click board is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket. Specifications Type Brushed Applications Usable for various RC cars and boats, small to medium-sized robots, drones, and similar applications. as well as for driving motors in air or water pumps, air conditioners, ventilation systems, handheld tools, etc. On-board modules TB67H451FNG Key Features DC Motor 6 click is a PWM chopper type brushed DC motor driver, labeled as TB67H451FNG. This IC includes one channel of motor output block, using a wide range of supply voltages, while delivering reasonably high current to the connected DC motors. Interface GPIO Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 5V Resources mikroBUS mikroSDK Click board Catalog Click boards Downloads DC Motor 6 click 2D and 3D files DC Motor 6 click example on Libstock DC Motor 6 click schematic TB67H451FNG datasheet Powered by TCPDF (www.tcpdf.org)