Dataworks Technical 596 technical hotline +44 (0)1268 563720 datacoms wiring devices Cat 5e Data Cable Standards and approvals ISO/IEC 11801 TIA/EIA 568A BS EN 50173 IEC 60332 part 1 IEC 61034 (LSF/ZH cable only) IEC 60754 (LSF/ZH cable only) Technical specification Cable Type 4 x twisted pair Conductors 24 AWG solid copper. Sheath Description a) Flame retardant PVC or Enhanced Category 5, 100 ohm, UTP data cable for indoor applications. Designed to support high b) Flame retardant Low Smoke & Fume, speed, full duplex protocols deli ver ing up to 1Gbps performance at 100 MHz. Used for horizontal wiring Zero Halogen. between the patch panel IDC and the telecommunications outlet. Dimensions Diameter: 4.85mm Features Box Length: 305m l l Cat 5e performance Backward compatible Weight l l UTP Supplied in snag free boxes Standard PVC: 30g/m l l Cable length marked at 1m intervals Industry standard colour coded cable pairs LSF/ZH: 31g/m l Flame retardant cable sheath Sheath Colour l Available in Standard PVC or LSF/ZH versions Standard PVC: Grey LSF/ZH: Purple Wire Pairs Colour Installation BLUE & White/blue For termination details refer to specific RJ45 Outlet or Patch Panel data sheet. GREEN & White/green Basic guidelines for installation of cable: ORANGE & White/orange Minimum bend radii BROWN & White/brown a) During installation: 40mm Installation Temperature: b) After installation: 20mm 0C to +50C Maximum cable pull force: 85N Operating Temperature: Minimum installation temperature: 0C 20C to +75C Maximum cable run length: 90m NVP: Note: 69% For detailed installation guidelines contact your local Authorised Training Centre or Authorised Stockist for details of installation training courses available for MK Dataworks Structured Cabling systems. Boxes Refer to specific RJ45 Outlet or Patch Panel data sheet. For a full range of corresponding products, see pages 171-177 in the product selector.Dataworks Technical 597 wiring devices datacoms www.mkelectric.co.uk Patch Panels Standards and approvals Comply with ISO/IEC 11801, TIA/EIA 568, BS EN 50173 and IEC 60297 part 1 Technical specification Weight 16 port panel : 570g (inc. fixing kit) 24 port panel : 572g (inc. fixing kit) 32 port panel : 1186g (inc. fixing kit) 48 port panel : 1143g (inc. fixing kit) Colour Description Black MK 19 rack mounted patch panel offers a proven Cat 5e performance using state of the art printed IDC Contacts circuit technology. This enables a higher pack density to be achieved and allows maximum utilisation of cabinet space. Phosphor Bronze All ports are numerically identified with an additional writeable surface for port identification. IDC Style Krone compatible Features Jack Contacts l l Cat 5e performance Supplied complete with Fixing Screws, Phosphor Bronze with 50 microns Gold on 100 microns Cage Nuts and Cable Ties Nickel l UTP l 16, 24, 32 and 48 port panels Minimum 750 insertions l Colour coded IDC terminals (for TIA 568B l wiring configuration) LSA compatible IDC Terminals l l Write on labelling panels Unshuttered ports l Fits industry standard 19 equipment cabinets and racks Dimensions (mm)