Continuous Molded Strip Applicator Mini-Mac Applicator Application Tooling Specification Mechanical Feed - Continuous Molded Strip Order No. 63883-2600 FEATURES Directly adapts to most crimp presses and automatic wire processors Applicator designed to industry-standard mounting and shut height of 135.80mm (5.346 ) Conductor and insulation rings allow quick adjustment for conductor and cut-off tooling height change Quick set-up time plus the crimp height, track and feed adjustments can be set without removing the applicator from the crimp press SCOPE Products: Insulkrimp Male and Female Couplers 14-22 AWG Testing Mechanical The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections. The following charts show the UL and government specifications (MIL-T-7928) for various wire sizes. The tensile strength is shown in pounds and indicates the minimum acceptable force to break or separate the terminal from the conductor. Wire Size *Military Color Code *UL - 486 A *UL 486 C *UL 310 (AWG) Class 2 Yellow 26 3 N/A N/A 7 Yellow 24 5 N/A N/A 10 Red 22 8 8 8 15 Red 20 13 10 13 19 Red 18 20 10 20 38 Blue 16 30 15 30 50 Blue 14 50 25 50 70 Yellow 12 70 35 70 110 Yellow 10 80 40 80 150 Red 8 90 45 N/A 225 Blue 6 100 50 N/A 300 *UL - 486 A - Terminals (Copper conductors only) *UL - 486 C - Butt Splices, Parallel Splices, Closed End Connectors, and Wire Nuts *UL - 310 - Quick Disconnects, Flag and Couplers *Military Class 2- Military Approved Terminals only as listed Doc No. 63883-2600 Release Date: 12-07-04 UNCONTROLLED COPY Page 1 of 6 Revision: B Revision Date: 10-03-05 Continuous Molded Strip Applicator Product List The following is a partial list of the product order numbers and their specifications that this tool is designed to run. Updates to this list are available on www.molex.com. Wire Size Insulation Diameter Max. Strip Length Terminal No. Terminal Eng. No. AWG mm mm In. mm In. 19005-0003 AA-2261C 22-18 0.35-0.80 4.19 .165 7.92 .312 19005-0008 BB-2263C 16-14 1.30-2.00 4.19 .165 7.92 .312 DEFINITION OF TERMS The following illustration is a generic terminal representation and not an exact image of any terminal listed in the scope. MWID OR MAX Fully Insulated INSULATION DIAMETER Female and Male Quick Disconnect STRIP LENGTH FEMALE QD MALE QD CONTINUOUS MOLDED STRIP REF TAB SIZE BRUSH TAB SIZE Figure 1 WIRE STOP Doc No. 63883-2600 Release Date: 12-07-04 UNCONTROLLED COPY Page 2 of 6 Revision: B Revision Date: 10-03-05