by The Leading Enterprise Internet of Things Solution Wireless Accelerometer - G-Force Snapshot Sensor General Description Features of Monnit ALTA Sensors The ALTA Wireless Accelerometer - G-Force Snapshot Wireless range of 1,200+ feet through 12+ walls * Sensor is a digital, low-power, low-profile, capacitive Frequency-Hopping Spread Spectrum (FHSS) sensor that is able to measure acceleration on three Improved interference immunity axes to determine inclination. Improved power management for longer battery life ** (12+ years on AA batteries) Takes 3-axis g-force measurements Encrypt-RF Security (Diffie-Hellman Key Exchange + 4096 count/g sensitivity AES-128 CBC for sensor data messages) All ALTA sensors now have up to 3200 readings: - 10-minute heartbeats = 22 days Principle of Operation - 2-hour heartbeats = 266 days Over-the-air updates (future proof) The ALTA Wireless Accelerometerz - G-Force Snapshot Free iMonnit basic online wireless sensor monitoring Sensor Accelerometer activates at a set time interval and notification system to configure sensors, view (defined by user) and measures g-force along X, Y and data and set alerts via SMS text and email Z axes. Primary use is as an inclinometer or tilt sensor. There are three operating modes, 2 G, 4 G, or 8G. Actual range may vary depending on environment. * The data is displayed as g-force on each axis. Battery life is determined by sensor reporting ** Example: X: 0.001 Y: 0.031 Z: 1.01 frequency and other variables. Other power options are also available. Example Applications Wireless Range Comparison Wireless Range Comparison Inclination & vibration testing Orientation sensing Smart machines, smart structures & smart materials Monnit ALTA Many additional applications Monnit Other Wireless Platforms Wifi Bluetooth PAGE 1Monnit Wireless Accelerometer Orientation (Commercial Coin Cell) 1.125 in Pinch and Pull (28.575 mm) To Change Battery Gravity + 2.0 in X (50.8 mm) CR2032 BATTERY 0.875 in + (22.225 mm) Y + Z ALTA Commercial Coin Cell Wireless Accelerometer - G-Force Snapshot Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) ** Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Sensitivity 4096 count/g Sensitivity range selections +/-2 G, +/-4 G, +/-8 G Measurement accuracy 2.5 % (force: X, Y, Z) Minimum g-force to turn on/wake up 0.0500.100 g Fastest update interval/heart rate in any configuration Heartbeat: 1 minute Bandwidth for data measurement 800 Hz Integrated memory Up to 3200 sensor messages Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Weight 0.7 ounces Certifications 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 Industry Canada and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 Hardware cannot withstand negative voltage. Please take care when connecting a power device. * At temperatures above 100C, it is possible for the board circuitry to lose programmed memory. ** PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (sensor away from base) (sensor back into base) (press in on the sides) PAGE 2