EV100L-N-00A Offline Inductor-Less Regulator EV Board The Future of Analog IC Technology DESCRIPTION FEATURES The MP100L is a compact, inductor-less, good- Universal AC Input (85VAC-to-305VAC) efficiency, off-line regulator. It steps down the Inductor-Less AC line voltage to an adjustable DC output. It is Less than 100mW Standby Power a simple solution to provide a bias voltage to Excellent EMI ICs in off-line applications. Its integrated smart- Low BOM Cost control system uses AC line power only when Smart Control to Maximum Efficiency necessary, thus minimizing device losses to Adjustable Output Voltage from 1.5V to 15V achieve good efficiency. This device can help Good Line and Load Regulation system designs meet new standby power Thermal Shutdown Protection specifications. Short-Circuit Protection The MP100L provides various protections, such Provide Power-Good Signal as Thermal Shutdown (TSD), VD Over Voltage APPLICATIONS Protection (OVP), VD Shrot to GND Protection, Over Load Protection (OLP), Short Circuit Wall Switches and Dimmers Protection (SCP). Z-Wave Device and ZigBee Device for Home Automation The MP100L is available in SOIC8E package. Standby Power for General Off-line ELECTRICAL SPECIFICATION Applications Parameter Symbol Value Units All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. MPS and The Supply Voltage V 85~265 VAC IN Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. Output Voltage V 12 V OUT Output Current I 20 mA OUT EV100L-N-00A EVALUATION BOARD ( L x W x H ) 21mm x 14mm x 20mm Board Number MPS IC Number EV100L-N-00A MP100GN EV100L-N-00A Rev.1.0 www.MonolithicPower.com 1 9/9/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved. MPS CONFIDENTIAL MOUSER USE ONLY DO NOT DISTRIBUTEEV100L-N-00A OFFLINE INDUCTOR-LESS REGULATOR EV BO EVALUATION BOARD SCHEMATIC RF 20/1W L R4 R3 NC U1 BD1 1 100k MB6S CX1 PG RV 8 4 R5 VIN VOUT VO 220nF 85~265VAC NC 275VAC /275VAC GND 7 NC C3 R1 R6 90.9k 6 470pF/50V 1% NC VB MP100L N 3 C2 C4 FB 12V/20mA 4.7uF/16V 0.1uF/16V R2 5 VD 10.2k GND 1% C1 2 220uF/35V GND GND VOUT can be adjusted by choosing the value of R1 and R2, the relationship of them is: VOUT=1.235V*(1+R1/R2) For example, to get 5V output voltage, we can choose, R4=10.2k, R5=30.9k. The maximum output power of MP100L Vs input voltage is depicted by following chart for 12V, 5V and 3.3V output applications respectively. o The test condition is: in open frame, full bridge rectifier,ambient temperature is 25 C, the temperature o rise of MP100L is less than 60 C on the test board. EV100L-N-00A Rev.1.0 www.MonolithicPower.com 2 9/9/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved. MPS CONFIDENTIAL MOUSER USE ONLY DO NOT DISTRIBUTE