MP3306 30V, 700kHz Synchronous Step-Up White LED Driver DESCRIPTION FEATURES The MP3306 is a step-up converter designed for 3V~12V Input Voltage driving white LEDs from 3V to 12V power supply. Analog Dimming and PWM Dimming The MP3306 uses current mode, fixed frequency Output-to-Input Disconnect in Shutdown architecture to regulate the LED current, which is Mode measured through an external high-side current Programmable Open Load Shutdown sense resistor. The low 202mV feedback voltage Output Short Protection and synchronous rectification reduces power loss Low 202mV Feedback Voltage with +/-3% and improves efficiency. accuracy UVLO, Thermal Shutdown The MP3306 is turned off if an over-voltage condition is present due to an open circuit Available in 2mm x 2mm QFN12 Package condition. The output disconnect feature allows APPLICATIONS the output to be completely discharged. The MP3306 includes under-voltage lockout, current Smart Phone, MID, PDA limiting, output short protection and thermal Digital Still Cameras overload protection. Small LCD Displays The MP3306 is available in small 12-pin QFN All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. MPS (2mm x 2mm) package. and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP3306 Rev.1.02 www.MonolithicPower.com 1 1/18/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2018 MPS. All Rights Reserved. MP3306-30V 700kHz SYNCHRONOUS STEP-UP WHITE LED DRIVER ORDERING INFORMATION Part Number* Package Top Marking QFN12 (2x2mm) MP3306EG 3Y * For Tape & Reel, add suffix Z (e.g. MP3306EGZ). For RoHS Compliant packaging, add suffix LF (e.g. MP3306EGLFZ) PACKAGE REFERENCE (4) (1) Thermal Resistance JA JC ABSOLUTE MAXIMUM RATINGS QFN12 (2 x 2mm) ................... 80 ...... 16 ... C/W VSW, VOUT, VFB....................................-0.5V to 35V VBST.................................................... VSW +6V Notes: VIN, VL, ............................................ -0.5V to 14V 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the VEN, VOVP, VPWMI, VPWMO, VCC ........... -0.3V to 6.5V maximum junction temperature T (MAX), the junction-to- J (2) ambient thermal resistance , and the ambient temperature JA Continuous Power Dissipation (T = +25C) A T . The maximum allowable continuous power dissipation at A ....1.6W any ambient temperature is calculated by P (MAX) = (T D J Storage Temperature ............... -55C to +150C (MAX)-T )/ . Exceeding the maximum allowable power A JA dissipation will cause excessive die temperature, and the (3) regulator will go into thermal shutdown. Internal thermal Recommended Operating Conditions shutdown circuitry protects the device from permanent IN Supply Voltage VIN ........................ 3V to 12V damage. 3) The device is not guaranteed to function outside of its Vsw ................................................ -0.5V to 30V operating conditions. Operating Junct. Temp (T ) ...... -40C to +125C J 4) Measured on JESD51-7, 4-layer PCB. MP3306 Rev.1.02 www.MonolithicPower.com 2 1/18/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2018 MPS. All Rights Reserved.