MP9488GS-P Monolithic Power Systems

MP9488 450V, 300mA, Wide Input, Step-Down Regulator DESCRIPTION FEATURES The MP9488 is a 7.5V to 450V, wide input, 7.5V to 450V Wide Input Range 300mA, step-down converter. The MP9488 is Integrated 500V MOSFET typically used in buck topology, but it can also >500mA Switching Current Limit support buck boost, boost, and flyback topology Peak-Current and Variable Off-Time Control applications, even if the power supply range is Low VCC Operating Current very wide. Frequency Foldback Limited Maximum Frequency The MP9488 employs peak-current and variable-off-time control modes to regulate the Peak Current Compression in Light Load output voltage. It integrates a high-voltage start- Internal High-Voltage Current Source up circuit and one 500V MOSFET. The very Thermal Shutdown (Auto-Restart) simple structure helps achieve low cost and high VCC Under-Voltage Lockout (UVLO) with input voltage. In light-load condition, the MP9488 Hysteresis peak current and switching frequency decrease Timer-Based Overload Protection (OLP) as the load decreases, achieving high efficiency. Short-Circuit Protection (SCP) This makes the MP9488 ideal for scooters, E- Open-Loop Protection bikes, and other civil applications. APPLICATIONS Full protection features include thermal Scooter and E-Bike Control Power Supplies shutdown, VCC under-voltage lockout (UVLO), Solar Energy Systems overload protection (OLP), short-circuit protection (SCP), and open-loop protection. Automotive System Power Industrial Power Supplies The MP9488 is available in a SOIC-8 package. All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION D2 R1 C4 C3 FB VIN + R2 L1 MP9488 C1 + VIN D1 VOUT C2 - - MP9488 Rev 1.0 www.MonolithicPower.com 1 12/13/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved. VCC SWMP9488 450V, 300MA, WIDE INPUT, STEP-DOWN REGULATOR ORDERING INFORMATION Part Number* Package Top Marking MP9488GS SOIC-8 See Below * For Tape & Reel, add suffix Z (e.g. MP9488GSZ) TOP MARKING MP9488: Part number LLLLLLLL: Lot number MPS: MPS prefix Y: Year code WW: Week code PACKAGE REFERENCE TOP VIEW vcc 1 8 NC FB 2 7 VIN SW 3 6 NC SW 4 5 NC SOIC-8 (5) (1) Thermal Resistance JA JC ABSOLUTE MAXIMUM RATINGS SOIC-8 .................................. 96 ....... 45 ... C/W VIN to SW .................................... -0.3V to 500V All other pins to SW ...................... -0.3V to 6.5V NOTES: (2) 1) Exceeding these ratings may damage the device. Continuous power dissipation (T = +25C) A 2) The maximum allowable power dissipation is a function of the .................................................................. 1.3W maximum junction temperature T (MAX), the junction-to- J Junction temperature ............................... 150C ambient thermal resistance , and the ambient temperature JA T . The maximum allowable continuous power dissipation at A Lead temperature .................................... 260C any ambient temperature is calculated by P (MAX) = (T D J Storage temperature ................ -65C to +150C (MAX)-T )/ . Exceeding the maximum allowable power A JA dissipation produces an excessive die temperature, causing (3) Recommended Operating Conditions the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent Supply VIN to SW voltage ............. 7.5V to 450V damage. (4) 3) The device is not guaranteed to function outside of its operating Operating VCC range .............. 4.45V to 4.6V conditions. Operating junction temp. (T ). -40C to +125C J MP9488 Rev 1.0 www.MonolithicPower.com 2 12/13/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved.