MPQ5073 5.5V, 2A Low R Load Switch DSON with Programmable Current Limit AEC-Q100 Qualified The Future of Analog IC Technology DESCRIPTION FEATURES The MPQ5073 is a load switch to provide 2A Guaranteed Industrial/Automotive Temp load protection covering 0.5V to 5.5V voltage Range Limits range. With the small R in tiny packages, DSON Large V Range from 0.5V to 5.5V IN MPQ5073 provides very high efficient and <5A Shutdown Current space saving solution in notebook and tablet or Integrated 50m Low R FETs DSON other portable devices application. Typical 2A Load Current Range Push Pull PG Indicator With the soft start function, the MPQ5073 can Adjustable Start Up Slew Rate avoid inrush current during circuit start up. MPQ5073 also provides programmable soft Output discharge function start time, output discharge functions, OCP and <200ns Short-Circuitry Response Protection thermal shutdown features. Thermal Protection Small QFN-12 (2mmx2mm) Package for The max load at the output (source) is current Space Saving limited. This is accomplished by utilizing a Available in AEC-Q100 Qualified Grade sense FET topology. The magnitude of the current limit is controlled APPLICATIONS by an external resistor from the ILIM pin to Notebook and Tablet Computers ground. Portable Devices Solid State Drivers An internal charge pump drives the gate of the Handheld Devices power device, allowing a very low on-resistance DMOS power FET of just 50m . All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. MPS Tiny QFN-12 (2mmx2mm) of MPQ5073 is and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. available in space saving package. TYPICAL APPLICATION MPQ5073 MPQ5073 Rev. 1.02 www.MonolithicPower.com 1 4/26/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2019 MPS. All Rights Reserved. MPQ5073 5.5V, 2A LOW RDSON LOAD SWITCH WITH PROGRAMMABLE CURRENT LIMIT, AEC-Q100 QUALIFIED ORDERING INFORMATION Part Number* Package Top Marking MPQ5073GG QFN-12 (2mmx2mm) See Below MPQ5073GG-AEC1 * For Tape & Reel, add suffix Z (e.g. MPQ5073GGZ) TOP MARKING CB: product code of MPQ5073GG & MPQ5073GG-AEC1 Y: year code LLL: lot number PACKAGE REFERENCE QFN-12 (2mmx2mm) (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC V ................................................ 0.3V to +6.5V QFN-12 (2mmx2mm) ....80 16 C/W IN V ............................................... 0.3V to +6.5V CC Notes: V ............................................. 0.3V to +6.5V OUT 1) Exceeding these ratings may damage the device. EN, SS, ILIM ........................ 0.3V to Vcc+0.3 V 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- Junction Temperature ............................... 150C ambient thermal resistance JA, and the ambient temperature Lead Temperature .................................... 260C TA. The maximum allowable continuous power dissipation at (2) any ambient temperature is calculated by PD (MAX) = (TJ Continuous Power Dissipation (MAX)-TA)/JA. Exceeding the maximum allowable power QFN-12 (2mmx2mm) .................................. 1.6W dissipation will cause excessive die temperature, and the device will go into thermal shutdown. Internal thermal (3) shutdown circuitry protects the device from permanent Recommended Operating Conditions damage. Supply Voltage V .......................... 0.5V to 5.5V IN 3) The device is not guaranteed to function outside of its Supply Voltage V ............................ 3V to 5.5V CC operating conditions. 4) Measured on JESD51-7, 4-layer PCB. Output Voltage V ........................ 0.5V to 5.5V OUT Operating Junction Temp ...... -40C to +125C MPQ5073 Rev. 1.02 www.MonolithicPower.com 2 4/26/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2019 MPS. All Rights Reserved.