OKY-T5-D12P-C Murata

OKY-T/3,T/5-D12 Series www.murata-ps.com Adjustable Output 3 and 5-Amp DOSA-SMT DC/DC Converters PRODUCT OVERVIEW The OKY-T/3 and -T/5 series are miniature frequency synchronous buck converter switching non-isolated Point-of-Load (POL) DC/DC power topology, the high power conversion ef cient Point converters for embedded applications. The module of Load (POL) module features programmable is fully compatible with Distributed-power Open output voltage and On/Off control. These converters Standards Alliance (DOSA) industry-standard also include under voltage lock out (UVLO), output speci cations (www.dosapower.com). Applications short circuit protection, over-current and over include powering CPUs, datacom/telecom systems, temperature protections. programmable logic and mixed voltage systems. These units are designed to meet all standard The wide input range is 8.3 to 14 Volts DC. Two UL/EN/IEC 60950-1 safety and FCC EMI/RFI Typical unit maximum output currents are offered, 3 Amps (T/3 emissions certi cations and RoHS-6 hazardous models) or 5 Amps (T/5 models). Based on xed- substance compliance. FEATURES Non-isolated SMT POL DC/DC power module 8.3-14Vdc input voltage range Programmable output voltage from 0.7525-5.5Vdc Contents Page 3 Amp (T/3) or 5 Amp (T/5) output current models Description, Connection Diagram, Photograph 1 Drives 1000 F ceramic capacitive loads Ordering Guide, Model Numbering 2 High power conversion ef ciency 93% at 3.3 Vout Mechanical Speci cations, Input/Output Pinout 3 Detailed Electrical Speci cations 4 Outstanding thermal derating performance Output Voltage Adjustment, Soldering Guidelines 5 Over temperature and over current protection Technical Notes 6 On/Off control Product Label 8 UL/EN/IEC 60950-1 safety OKY-T/3-D12 Performance Data and Oscillograms 9 OKY-T/5-D12 Performance Data and Oscillograms 15 Industry-standard (DOSA) surface-mount package Tape and Reel Information 21 RoHS-6 hazardous substance compliance Connection Diagram +Vin +Vout t
4XJUDIJOH F1 On/Off Control t
' JMUFST Controller t
$VSSFOU
4FOTF External Trim DC Power Reference and Open = On Source Error Amplier Closed = Off (Positive On/Off) Common Common Figure 1. OKY-T/3, -T/5 Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci cations. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKY-T/3,T/5-D12 Series.B15 Page 1 of 21OKY-T/3,T/5-D12 Series Adjustable Output 3 and 5-Amp DOSA-SMT DC/DC Converters Performance Speci cations Summary and Ordering Guide ORDERING GUIDE Output Input Package IOUT R/N (mVp-p) Regulation (Max.) IIN, IIN, Ef ciency VOUT (Amps Power VIN Nom. Range no load full load Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Case C72 Pinout 0.47 x 0.82 x 0.28 OKY-T/3-D12N-C 0.75-5.5 3 15 25 0.1% 0.2% 12 8.3-14 80 1.34 91.5% 93% P78 (11.9 x 20.8 x 7.0) 0.47 x 0.82 x 0.28 OKY-T/3-D12P-C 0.75-5.5 3 15 25 0.1% 0.2% 12 8.3-14 80 1.34 91.5% 93% P78 (11.9 x 20.8 x 7.0) 0.47 x 0.82 x 0.28 OKY-T/5-D12N-C 0.75-5.5 5 25 25 0.2% 0.5% 12 8.3-14 80 2.24 91.5% 93% P78 (11.9 x 20.8 x 7.0) 0.47 x 0.82 x 0.28 OKY-T/5-D12P-C 0.75-5.5 5 25 25 0.2% 0.5% 12 8.3-14 80 2.24 91.5% 93% P78 (11.9 x 20.8 x 7.0) Dimensions are in inches (mm). Vin must be 2V or higher than Vout for 3.3 to 5V outputs. These are partial model numbers. Please refer to the part number structure for complete ordering part numbers. Ripple and Noise is shown at Vout=1V. See specs for details. All specifications are at nominal line voltage, Vout=nominal (5V for D12 models) and full load, +25 C. unless Max. VOUT = 5.1V at IOUT = 5A. otherwise noted. Max. VOUT = 5.1V at IOUT = 3A. Output capacitors are 1 F ceramic and 10 F electrolytic in parallel. Input cap is 22 F. See detailed specifica- tions. I/O caps are necessary for our test equipment and may not be needed for your application. PART NUMBER STRUCTURE OK Y - T / 5 - D12 N - C Okami Non-isolated PoL RoHS Hazardous Substance Compliance C = RoHS-6 (does not claim EU RoHS exemption 7blead in solder) Surface Mount On/Off Polarity P = Positive Polarity N = Negative Polarity Trimmable Output Voltage Range 0.7525-5.5V Input Voltage Range 8.3-14V Maximum Rated Output Note: Some model number combinations Current in Amps may not be available. Contact Murata Power Solutions for availability. Special Customer Con guration part number: OKY-T/5-D12N-C-CIS www.murata-ps.com/support MDC_OKY-T/3,T/5-D12 Series.B15 Page 2 of 21