SF2250E-1 Low-loss SAW Filter, 1615 MHz, 20 MHz Bandwidth 3.0 x 3.0 x 1.4 mm Surface-mount Case 1615 MHz Pb 50 Input/Output Impedance Complies with Directive 2002/95/EC (RoHS) SAW Filter Absolute Maximum Ratings Rating Value Units Incident Power in Passband +24 dBm DC Voltage on any Non-ground Terminal 3 VDC Operating Temperature Range -20 to +70 C Storage Temperature Range in Tape and Reel -40 to +85 C SM3030-6 C Maximum Soldering Profile, 5 cycles/10 seconds maximum 265 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 1615 MHz C Insertion Loss, 1605 to 1625 MHz IL 3.4 4.6 dB Amplitude Ripple, p-p, 1605 to 1625 MHz 0.3 2.0 Attenuation Referenced to 0 dB 1100 to 1400 MHz 40 55 1400 to 1550 MHz 33 52 dB 1700 to 1825 MHz 30 52 1825 to 1900 MHz 36 52 Terminating Source impedance Z 50 S Terminating Load impedance Z 50 L Input/Output Impedance Match No matching network required for 50 ohm source/load Case Style SM3030-6 Lid Symbolization 5M CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. US and international patents may apply. 2. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright Murata Manufacturing Co., Ltd. All Rights Reserved 2015 SF2250E-1 8/19/16 Page 1 of 4 www.murata.comMatching Circuit SF2250E Frequency Response Plots Copyright Murata Manufacturing Co., Ltd. All Rights Reserved 2015 www.murata.com SF2250E-1 8/19/16 Page 2 of 4