SF2395E Surface Mount 3.0 x 3.0 mm Package Complies with Directive 2002/95/EC (RoHS) Pb 1224 MHz SAW Filter Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operable Temperature Range -45 to +125 C Specification Temperature Range -40 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C SM3030-6 Electrical Characteristics - -40 to +85C Characteristic Sym Notes Min Typ Max Units f Center Frequency 1224 MHz C Insertion Loss, (1170 to 1278 MHz) IL 4.4 5.5 dB Pass Band Ripple, (1170 to 1278 MHz) 2.4 3.5 Group Delay Variation (1170 to 1278 MHz) 12 30 ns Return Loss (1170 to 1278 MHz) 6 6.8 dB Attenuation, Referenced from 0 dB: 50 to 1025 MHz 18 27 dB 1320 to 2000 MHz 918 Temperature coefficient of frequency -80 Ppm/C Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 7A, YWWS Electrical Connections Connection Terminals Input 2 2 5 Output 5 Case Ground All others 1, 3, 4, 6 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4.LRI or after the part number indicateslow rate initial productio andEN or indicatesengineering prototypes 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright Murata Manufacturing Co., Ltd. All rights reserved. August 2015 SF2395E 5/19/17 Page 1 of 5 www.murata.comAbsolute Maximum Ratings - -40 to +105C Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operable Temperature Range -45 to +125 C Specification Temperature Range -40 to +105 C Storage Temperature Range in Tape and Reel -40 to +85 C Electrical Characteristics - -40 to +105C Characteristic Sym Notes Min Typ Max Units f Center Frequency 1224 MHz C Insertion Loss, (1170 to 1278 MHz) IL 4.4 5.8 dB Pass Band Ripple, (1170 to 1278 MHz) 2.4 3.8 Group Delay Variation (1170 to 1278 MHz) 12 30 ns Return Loss (1170 to 1278 MHz) 6 6.8 dB Attenuation, Referenced from 0 dB: 50 to 1025 MHz 18 27 dB 1320 to 2000 MHz 918 Temperature coefficient of frequency -80 Ppm/C Copyright Murata Manufacturing Co., Ltd. All rights reserved. August 2015 SF2395E 5/19/17 Page 2 of 5 www.murata.com