MYS-6ULX Single Board Computer 528MHz NXP i.MX 6UltraLite / 6ULL ARM Cortex-A7 Processor 256MB DDR3, 256MB Nand Flash Ethernet, WiFi, LCD, USB Host, Device, TF Card, Buttons, LED, IO Optional MYB-6ULX Expansion Board adds Ethernet, CAN, RS485, Audio, RTC and Camera Optional 4.3 or 7 inch LCD Module and Camera Module Two Variants of MYS-6ULX Boards Respectively for Industry 4.0 and IoT Applications Support Linux 4.1.15 with Debian distribution or by Yocto Project with Ported QT Figure 1-1 MYS-6ULX-IND Figure 1-2 MYS-6ULX-IOT Description Measuring only 70mm by 55mm, the MYS-6ULX Single Board Computer is a high-performance low-cost System-on-Module (SoM) specially designed for Industry 4.0 (Industrie 4.0) and Internet of Things (IoT) applications. It is based on NXPs i.MX 6UltraLite / 6ULL processor family which features the most efficient ARM Cortex-A7 core and can operate at speeds up to 696 MHz. The MYS-6ULX has two variants of boards which are called MYS-6ULX-IND and MYS-6ULX-IOT to meet different applications. The MYS-6ULX-IND is targeting industry 4.0 applications and based on i.MX6UL series processors while the MYS-6ULX-IOT is oriented for IOT applications and using i.MX6ULL series processors. They share the same hardware circuit design and fully compatible in software but also have their own characteristics. They have integrated 256MB DDR3 and 256MB Nand Flash as well as a set of peripherals and interfaces including Ethernet, USB Host, Device, LCD interface, TF card slot, etc. The MYS-6ULX-IOT has additionally a USB based WiFi module with antenna on the board. The MYS-6ULX-IND can support -40 to +85 Celsius extended temperature operation, which makes the board more suitable for industrial control and communication applications. MYIR has ported Linux 4.1.15 for the board with Debian distribution as well as Yocto project with ported QT. MYIR has also provided an interesting demo to enable customers to experience Amazon Alexa Voice Service. 1 / 10 Figure 1-3 MYS-6ULX-IND Figure 1-4 MYS-6ULX-IOT 2 / 10