74AVC2T45GS,115 Nexperia

74AVC2T45 Dual-bit, dual-supply voltage level translator/transceiver 3-state Rev. 10 4 November 2021 Product data sheet 1. General description The 74AVC2T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation. It features two data input-output ports (nA and nB), a direction control input (DIR) and dual-supply pins (V and V ). Both V and V can be supplied at any voltage between 0.8 V CC(A) CC(B) CC(A) CC(B) and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins nA and DIR are referenced to V and pins nB CC(A) are referenced to V . A HIGH on DIR allows transmission from nA to nB and a LOW on DIR CC(B) allows transmission from nB to nA. The device is fully specified for partial power-down applications using I . The I circuitry OFF OFF disables the output, preventing any damaging backflow current through the device when it is powered down. In Suspend mode when either V or V are at GND level, both A and B are CC(A) CC(B) in the high-impedance OFF-state. 2. Features and benefits Wide supply voltage range: V : 0.8 V to 3.6 V CC(A) V : 0.8 V to 3.6 V CC(B) High noise immunity Complies with JEDEC standards: JESD8-12 (0.8 V to 1.3 V) JESD8-11 (0.9 V to 1.65 V) JESD8-7 (1.2 V to 1.95 V) JESD8-5 (1.8 V to 2.7 V) JESD8-B (2.7 V to 3.6 V) ESD protection: HBM JESD22-A114F Class 3B exceeds 8000 V MM JESD22-A115-A exceeds 200 V CDM JESD22-C101C exceeds 1000 V Maximum data rates: 500 Mbit/s (1.8 V to 3.3 V translation) 320 Mbit/s (<1.8 V to 3.3 V translation) 320 Mbit/s (translate to 2.5 V or 1.8 V) 280 Mbit/s (translate to 1.5 V) 240 Mbit/s (translate to 1.2 V) Suspend mode Latch-up performance exceeds 100 mA per JESD 78 Class II Inputs accept voltages up to 3.6 V Low noise overshoot and undershoot < 10 % of V CC I circuitry provides partial Power-down mode operation OFF Multiple package options Specified from -40 C to +85 C and -40 C to +125 CNexperia 74AVC2T45 Dual-bit, dual-supply voltage level translator/transceiver 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AVC2T45DP -40 C to +125 C TSSOP8 plastic thin shrink small outline package 8 leads SOT505-2 body width 3 mm lead length 0.5 mm 74AVC2T45DC -40 C to +125 C VSSOP8 plastic very thin shrink small outline package SOT765-1 8 leads body width 2.3 mm 74AVC2T45GT -40 C to +125 C XSON8 plastic extremely thin small outline package SOT833-1 no leads 8 terminals body 1 1.95 0.5 mm 74AVC2T45GF -40 C to +125 C XSON8 extremely thin small outline package no leads SOT1089 8 terminals body 1.35 1 0.5 mm 74AVC2T45GN -40 C to +125 C XSON8 extremely thin small outline package no leads SOT1116 8 terminals body 1.2 1.0 0.35 mm 74AVC2T45GS -40 C to +125 C XSON8 extremely thin small outline package no leads SOT1203 8 terminals body 1.35 1.0 0.35 mm 74AVC2T45GX -40 C to +85 C X2SON8 plastic thermal enhanced extremely thin SOT1233-2 small outline package no leads 8 terminals body 1.35 0.8 0.32 mm 4. Marking Table 2. Marking Type number Marking code 1 74AVC2T45DP B45 74AVC2T45DC B45 74AVC2T45GT B45 74AVC2T45GF B5 74AVC2T45GN B5 74AVC2T45GS B5 74AVC2T45GX B5 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 74AVC2T45 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2021. All rights reserved Product data sheet Rev. 10 4 November 2021 2 / 25