HEF4013BT,652

HEF4013B Dual D-type flip-flop Rev. 10 23 November 2021 Product data sheet 1. General description The HEF4013B is a dual D-type flip-flop with set and reset positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V . DD 2. Features and benefits Wide supply voltage range from 3.0 V to 15.0 V CMOS low power dissipation High noise immunity Tolerant of slow clock rise and fall times Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Specified from -40 C to +125 C Complies with JEDEC standard JESD 13-B ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-B exceeds 200 V 3. Applications Counters and dividers Registers Toggle flip-flops 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version HEF4013BT -40 C to +125 C SO14 plastic small outline package 14 leads SOT108-1 body width 3.9 mm HEF4013BTT -40 C to +125 C TSSOP14 plastic thin shrink small outline package SOT402-1 14 leads body width 4.4 mmNexperia HEF4013B Dual D-type flip-flop 5. Functional diagram 6 1SD SD 5 1 1D D Q 1Q FF1 3 2 1CP CP Q 1Q CD 4 1CD 8 2SD SD 9 13 2D D Q 2Q FF2 11 12 2CP CP Q 2Q CD 10 2CD 001aag084 Fig. 1. Functional diagram CP C C Q C C C C C C D Q C C SD CD 001aag086 Fig. 2. Logic diagram (one flip-flop) HEF4013B All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2021. All rights reserved Product data sheet Rev. 10 23 November 2021 2 / 14