NXB0102-Q100 Dual supply translating transceiver auto direction sensing 3-state Rev. 2 13 November 2020 Product data sheet 1. General description The NXB0102-Q100 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V and V ). V can be supplied at CC(A) CC(B) CC(A) any voltage between 1.2 V and 3.6 V and V can be supplied at any voltage between 1.65 V CC(B) and 5.5 V, making the device suitable for translating between any of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to V and pins Bn are CC(A) referenced to V . A LOW level at pin OE causes the outputs to assume a high-impedance CC(B) OFF-state. This device is fully specified for partial power-down applications using I . The I OFF OFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 C to +85 C and from -40 C to +125 C Wide supply voltage range: V : 1.2 V to 3.6 V and V : 1.65 V to 5.5 V CC(A) CC(B) I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV Latch-up performance exceeds 100 mA per JESD 78B Class II 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NXB0102DC-Q100 -40 C to +125 C VSSOP8 plastic very thin shrink small outline package SOT765-1 8 leads body width 2.3 mm 4. Marking Table 2. Marking Type number Marking code 1 NXB0102DC-Q100 n2 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code.Nexperia NXB0102-Q100 Dual supply translating transceiver auto direction sensing 3-state 5. Functional diagram OE 4 k ONE ONE An Bn SHOT SHOT 4 k V V To other channels CC(A) CC(B) aaa-030666 Fig. 1. Functional diagram (for one channel) 6. Pinning information 6.1. Pinning NXB0102 B2 1 8 B1 GND 2 7 V CC(B) V 3 6 OE CC(A) A2 4 5 A1 aaa-030667 Fig. 2. Pin configuration SOT765-1 (VSSOP8) 6.2. Pin description Table 3. Pin description Symbol Pin Description B2, B1 1, 8 data input or output (referenced to V ) CC(B) GND 2 ground (0 V) V 3 supply voltage A CC(A) A2, A1 4, 5 data input or output (referenced to V ) CC(A) OE 6 output enable input (active HIGH referenced to V ) CC(A) V 7 supply voltage B CC(B) NXB0102 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 2 13 November 2020 2 / 21