LGX2W151MELA30

10 10 10 0.1 10 ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Snap-in Terminal Type, 105C Long Life Assurance Snap-in Terminal Type, 105C Long Life Assurannce, Smaller-Sized LGZ LGX Long life assurance series withstanding 5000 hours Long life product of LGR series. C. application of rated ripple current at 105 Contribute to longer life of equipment. Suited for rectifier circuit of general inverter, Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). switching power supply. LGY Addition of 500V rated voltage. Smaller Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Long Life LGR LGZ LGX Specifications Specifications Item Performance Characteristics Item Performance Characteristics Category Temperature Range 25 to +105C Category Temperature Range 25 to +105C Rated Voltage Range 450V Rated Voltage Range 200 to 500V Rated Capacitance Range 82 to 330F Rated Capacitance Range 56 to 2200F Capacitance Tolerance 20% at 120Hz, 20C 3 CV Capacitance Tolerance 3 CV 20% at 120Hz, 20C After 5 minutes application of rated voltage at 20C, leakage current is not more than (A) or 5 mA, whichever is smaller (at 20C) Leakage Current 3 CV I 3 (A) (After 5 minutes application of rated voltage) C : Rated Capacitance (F) V : Voltage (V) C : Rated Capacitance (F) , V : Voltage (V) Leakage Current CV 3 CV 3 Tangent of loss angle (tan ) 0.20MAX. 120Hz at 20C CV Measurement frequency : 120Hz at 20C Rated voltage(V) 200 to 400 450 to 500 Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 0.15 0.20 450 Stability at Low Temperature Z 25C / Z+20C Impedance ratio ZT/Z20(MAX.) 8 200 250 Rated voltage(V) 400 to 500 Measurement frequency : 120Hz Stability at Low Temperature The specifications listed at right shall be met when the Impedance Capacitance change Within 25% of the initial capacitance value Z25C/Z+20C 4 8 capacitors are restored to 20C after D.C. bias plus ratio (MAX.) Endurance tan 250% or less than the initial specified value rated ripple current is applied for 20000 hours at 105C, Leakage current Less than or equal to the initial specified value the peak voltage shall not exceed the rated voltage. The specifications listed at right shall be met when the Capacitance change Within 20% of the initial capacitance value capacitors are restored to 20C after D.C. bias plus rated Endurance tan 200% or less than the initial specified value After storing the capacitors under no load at 105C for 1000 Capacitance change Within 15% of the initial capacitance value ripple current is applied for 5000 hours at 105C, the peak hours and then performing voltage treatment based Leakage current Less than or equal to the initial specified value Shelf Life tan 150% or less than the initial specified value voltage shall not exceed the rated voltage. on JIS C 5101-4 clause 4.1 at 20C, Less than or equal to the initial specified value Leakage current they shall meet the characteristic requirements listed at right. After storing the capacitors under no load at 105C Capacitance change Within 15% of the initial capacitance value for 1000 hours and then performing voltage treatment Marking Printed with white color letter on black sleeve. Shelf Life tan 150% or less than the initial specified value based on JIS C 5101-4 clause 4.1 at 20C, Leakage current Less than or equal to the initial specified value they shall meet the requirements listed at right. Drawing Type numbering system (Example : 450V 82 F) Marking Printed with white color letter on black sleeve. Polarity bar 1 2 3 4 5 6 7 8 910 11 12 13 14 Sleeve (Polyolefin) L G Z 2 W 8 2 0 M E L B 25 Case length code Case dia. code Drawing Type numbering system (Example : 400V 120F) Configuration D Code Capacitance tolerance (20%) 30 B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2 4.00.5 35 C L Rated capacitance (82F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 L G X 2 G 1 2 1 M E L Z 3 0 Rated voltage (450V) Pressure relief vent L G X 2 G 1 2 1 M E L Z 3 0 Case length code Case length code Series name Case dia. code Case dia. code Type Configuration D Code Configuration +0.2 D Code 0.8 -0.1 Capacitance tolerance (20%) 22 Z 4.00.5 Capacitance tolerance (20%) 4.00.5 22 Z 25 A Dimensions Rated capacitance (120F) 25 A Rated capacitance (120F) 30 B Rated voltage (400V) 30 B 450V (2W) Rated voltage (400V) 35 C +0.2 35 C 0.8 Series name -0.1 +0.2 Cap. Size Rated ripple Leakage Current 0.8 Series name -0.1 +0.2 1.5 Code -0.1 Type (mArms) (mA) (F) D L(mm) 0.1 Type 2-2 82 30 25 560 LGZ2W820MELB25 0.57 (Terminal dimensions) (PC board hole dimensions) LGZ2W101MELB30 100 30 30 640 0.63 Other terminations available upon request. LGZ2W121MELB35 30 35 720 0.69 +0.2 120 +0.21.5 -0.1 Please refer to the Guidelines for Aluminum LGZ2W121MELC25 1.5 -0.1 35 25 720 0.69 Electrolytic Capacitors. LGZ2W151MELB40 30 40 790 0.77 150 LGZ2W151MELC30 35 30 790 0.77 LGZ2W181MELB45 30 45 870 0.85 180 LGZ2W181MELC35 35 35 870 0.85 Other terminations available upon request. LGZ2W221MELB50 30 50 1000 0.94 220 Please refer to the Guidelines for Aluminum Electrolytic Capacitors. LGZ2W221MELC40 35 40 1000 0.94 LGZ2W271MELC45 270 35 45 1190 1.04 LGZ2W331MELC50 330 35 50 1380 1.15 Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 50 60 120 300 1 k 10k 50k or more Coefficient 0.77 0.82 1.00 1.16 1.30 1.41 1.43 Minimum order quantity : 50pcs. Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100K 0.8 0.8 0.8 +0.2 -0.1 +0.2 +0.2 -0.1 -0.1 +1.5 MAX. D 4.00.5 2.5 4.00.5 2.5 4.00.5 2.5ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS LGX LGX Dimensions Dimensions 200V (2D) 250V (2E) 500V (2H) Rated Rated Rated Cap. Size Cap. Size Cap. Size Leakage Current Leakage Current Leakage Current ripple Code ripple Code ripple Code (F) D L(mm) (mA) (F) D L(mm) (mA) (F) D L(mm) (mA) (mArms) (mArms) (mArms) 1100 0.77 LGX2D331MELZ25 56 560 0.50 LGX2H560MELZ25 330 22 25 270 1010 0.77 LGX2E271MELZ25 22 25 22 25 1380 0.83 LGX2D391MELZ30 590 0.55 LGX2H680MELZ30 390 22 30 1200 0.86 LGX2E331MELZ30 22 30 22 30 68 330 1550 0.91 LGX2D471MELZ35 650 0.55 LGX2H680MELA25 22 35 1320 0.86 LGX2E331MELA25 25 25 25 25 470 1390 0.91 LGX2D471MELA25 720 0.60 LGX2H820MELZ35 25 25 1440 0.93 LGX2E391MELZ35 22 35 22 35 82 390 1550 1.00 LGX2D561MELZ35 740 0.60 LGX2H820MELA30 560 22 35 1430 0.93 LGX2E391MELA30 25 30 25 30 1730 1.10 LGX2D681MELZ40 100 770 0.67 LGX2H101MELZ40 22 40 1620 1.02 LGX2E471MELZ40 22 40 22 40 1870 1.10 LGX2D681MELA35 930 0.73 LGX2H121MELZ50 680 25 35 470 1600 1.02 LGX2E471MELA35 22 50 25 35 1980 1.10 LGX2D681MELB30 120 930 0.73 LGX2H121MELA35 30 30 1510 1.02 LGX2E471MELB25 25 35 30 25 2180 1.21 LGX2D821MELZ50 820 0.73 LGX2H121MELB25 22 50 1800 1.12 LGX2E561MELZ45 30 25 22 45 820 2090 1.21 LGX2D821MELA40 1080 0.82 LGX2H151MELA45 25 40 560 1780 1.12 LGX2E561MELA35 25 45 25 35 2350 1.34 LGX2D102MELA45 150 910 0.82 LGX2H151MELB30 25 45 1830 1.12 LGX2E561MELB30 30 30 30 30 2220 1.34 LGX2D102MELB35 990 0.82 LGX2H151MELC25 1000 30 35 2000 1.23 LGX2E681MELZ50 35 25 22 50 2610 1.34 LGX2D102MELC30 1200 0.90 LGX2H181MELA50 35 30 2000 1.23 LGX2E681MELA40 25 50 25 40 680 2400 1.46 LGX2D122MELA50 180 1040 0.90 LGX2H181MELB35 25 50 2060 1.23 LGX2E681MELB35 30 35 30 35 2530 1.46 LGX2D122MELB40 1100 0.90 LGX2H181MELC30 1200 30 40 1910 1.23 LGX2E681MELC25 35 30 35 25 2880 1.46 LGX2D122MELC35 1330 0.99 LGX2H221MELB45 35 35 2150 1.35 LGX2E821MELA45 30 45 25 45 220 3000 1.64 LGX2D152MELB50 1230 0.99 LGX2H221MELC35 30 50 820 2060 1.35 LGX2E821MELB35 35 35 30 35 1500 3080 1.64 LGX2D152MELC40 1500 1.10 LGX2H271MELB50 35 40 2150 1.35 LGX2E821MELC30 30 50 35 30 270 3280 1.80 LGX2D182MELC45 1420 1.10 LGX2H271MELC40 1800 35 45 2330 1.50 LGX2E102MELB40 35 40 30 40 1000 35 50 3450 1.98 LGX2D222MELC50 330 1600 1.21 LGX2H331MELC45 2200 2380 1.50 LGX2E102MELC35 35 45 35 35 390 1780 1.32 LGX2H391MELC50 2680 1.64 LGX2E122MELB50 35 50 30 50 1200 470 35 58 2030 1.45 LGX2H471MELC58 2720 1.64 LGX2E122MELC40 35 40 Rated ripple current (mArms) at 105C 120Hz 1500 3050 1.83 LGX2E152MELC45 35 45 3300 2.01 1800 35 50 LGX2E182MELC50 ( ) 400V (2G) 450V 2W Frequency coefficient of rated ripple current Rated Rated Cap. Size Cap. Size Leakage Current Leakage Current ripple Code ripple Code (mA) (mA) (F) D L(mm) (F) D L(mm) (mArms) (mArms) Frequency (Hz) 50 60 120 300 1k 10k 50k or more 100 660 0.60 LGX2G101MELZ25 82 590 0.57 LGX2W820MELZ25 22 25 22 25 200 250V 0.81 0.85 1.00 1.17 1.32 1.45 1.50 Coeff. 400 to 500V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 120 750 0.65 LGX2G121MELZ30 690 0.63 LGX2W101MELZ30 22 30 22 30 100 860 0.73 LGX2G151MELZ35 700 0.63 LGX2W101MELA25 22 35 25 25 Minimum order quantity : 50pcs. 150 860 0.73 LGX2G151MELA25 770 0.69 LGX2W121MELZ35 25 25 22 35 120 860 0.80 LGX2G181MELZ35 880 0.69 LGX2W121MELA30 22 35 25 30 180 970 0.80 LGX2G181MELA30 880 0.77 LGX2W151MELZ40 25 30 22 40 1020 0.80 LGX2G181MELB25 150 880 0.77 LGX2W151MELA30 30 25 25 30 1090 0.88 LGX2G221MELZ45 930 0.77 LGX2W151MELB25 22 45 30 25 220 1120 0.88 LGX2G221MELA35 900 0.85 LGX2W181MELZ45 25 35 22 45 1230 0.98 LGX2G271MELZ50 920 0.85 LGX2W181MELA35 22 50 25 35 180 1260 0.98 LGX2G271MELA40 1030 0.85 LGX2W181MELB30 25 40 30 30 270 1270 0.98 LGX2G271MELB30 1100 0.85 LGX2W181MELC25 30 30 35 25 1220 0.98 LGX2G271MELC25 1030 0.94 LGX2W221MELA40 35 25 25 40 1300 1.08 LGX2G331MELA45 220 1170 0.94 LGX2W221MELB35 25 45 30 35 330 1430 1.08 LGX2G331MELB35 1100 0.94 LGX2W221MELC25 30 35 35 25 1440 1.18 LGX2G391MELA50 1310 1.04 LGX2W271MELA50 25 50 25 50 390 1600 1.18 LGX2G391MELB40 270 1330 1.04 LGX2W271MELB40 30 40 30 40 1520 1.18 LGX2G391MELC30 1240 1.04 LGX2W271MELC30 35 30 35 30 1810 1.30 LGX2G471MELB45 1510 1.15 LGX2W331MELB45 30 45 30 45 470 330 1670 1.30 LGX2G471MELC35 1390 1.15 LGX2W331MELC35 35 35 35 35 560 1900 1.41 LGX2G561MELC40 1670 1.25 LGX2W391MELB50 35 40 30 50 390 680 35 45 2120 1.56 LGX2G681MELC45 1730 1.25 LGX2W391MELC40 35 40 470 1830 1.37 LGX2W471MELC45 35 45 560 35 50 1980 1.50 LGX2W561MELC50 Rated ripple current (mArms) at 105C 120Hz CAT.8100K