ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Approved by Reliability Center for Electronic Miniature Sized, Low Impedance, Component, Japan-Certification No. RCJ-03-23C High Reliability UHD UHE Dimensions Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Impedance Leakage Current Rated Voltage Rated Rated Ripple MAX. Case Size A V Capacitance tan mArms Part Number DLmm at 20 after 20/ 10/ code F 105/100kHz Long Life UHD 2 minutes UHE 100kHz 100kHz 47 511 0.14 11.75 0.30 1.00 250 UHD1E470MDD 100 6.311 0.14 25 0.13 0.41 405 UHD1E101MED Specifications 220 811.5 0.14 55 0.072 0.22 760 UHD1E221MPD ltem Performance Characteristics 330 815 0.14 82.5 0.056 0.17 995 UHD1E331MPD Category Temperature Range 40 to +105C 330 1012.5 0.14 82.5 0.053 0.16 1030 UHD1E331MPD6 470 820 0.14 117.5 0.041 0.13 1250 UHD1E471MPD Rated Voltage Range 6.3 to 100V 470 1016 0.14 117.5 0.038 0.12 1430 UHD1E471MPD6 Rated Capacitance Range 2.2 to 18000F 25 680 1020 0.14 170 0.023 0.069 1820 UHD1E681MPD Capacitance Tolerance 20% at 120Hz, 20C 1E 820 1025 0.14 205 0.022 0.066 2150 UHD1E821MPD After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Leakage Current 1000 12.520 0.14 250 0.021 0.053 2360 UHD1E102MHD Rated voltage (V) 6.3 10 16 25 35 50 63 100 120Hz 1500 12.525 0.14 375 0.018 0.045 2770 UHD1E152MHD Tangent of loss angle (tan ) 20C tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 1800 12.531.5 0.14 450 0.016 0.041 3290 UHD1E182MHD For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 1800 1620 0.14 450 0.018 0.045 3140 UHD1E182MHD6 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 100 2200 12.535.5 0.16 550 0.015 0.039 3400 UHD1E222MHD Stability at Low Temperature Z25C / Z+20C 4 3 2 2 2 2 2 2 2700 1625 0.16 675 0.016 0.043 3460 UHD1E272MHD Impedance ratio (MAX.) 33 511 0.12 11.55 0.30 1.00 250 UHD1V330MDD Z40C / Z+20C 8 6 4 3 3 3 3 3 56 6.311 0.12 19.6 0.13 0.41 405 UHD1V560MED The following specifications shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is 150 811.5 0.12 52.5 0.072 0.22 760 UHD1V151MPD applied at 105C , the peak voltage shall not exceed the rated voltage. 220 815 0.12 77 0.056 0.17 995 UHD1V221MPD < > Case size D 6.3 D = 8 , 10 D 12.5 = = 220 1012.5 0.12 77 0.053 0.16 1030 UHD1V221MPD6 6.3 to 10V 4000 hours 6000 hours 8000 hours 270 820 0.12 94.5 0.041 0.13 1250 UHD1V271MPD Endurance Rated voltage 16 to 100V 5000 hours 7000 hours 10000 hours 330 1016 0.12 115.5 0.038 0.12 1430 UHD1V331MPD 35 Capacitance change Within 25% of the initial capacitance value 470 1020 0.12 164.5 0.023 0.069 1820 UHD1V471MPD 1V tan 200% or less than the initial specified value 560 1025 0.12 196 0.022 0.066 2150 UHD1V561MPD Leakage current Less than or equal to the initial specified value 680 12.520 0.12 238 0.021 0.053 2360 UHD1V681MHD 1000 12.525 0.12 350 0.018 0.045 2770 UHD1V102MHD Marking Printed with white color letter on black sleeve. 1200 12.531.5 0.12 420 0.016 0.041 3290 UHD1V122MHD 1200 1620 0.12 420 0.018 0.045 3140 UHD1V122MHD6 Radial Lead Type Type numbering system (Example : 10V 1000F) d 1500 12.535.5 0.12 525 0.015 0.039 3400 UHD1V152MHD 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve (P.E.T.) 1800 1625 0.12 630 0.016 0.043 3460 UHD1V182MHD U H E 1 A 1 0 2 M P D 22 511 0.10 11 0.34 1.18 238 UHD1H220MDD Size code Configuration 56 6.311 0.10 28 0.14 0.50 385 UHD1H560MED Capacitance tolerance ( 20%) 100 811.5 0.10 50 0.074 0.22 724 UHD1H101MPD Rated capacitance (1000F) 120 815 0.10 60 0.061 0.18 950 UHD1H121MPD MIN + MAX. MIN L 15 4 Rated voltage (10V) Pressurerelief vent 150 1012.5 0.10 75 0.061 0.18 979 UHD1H151MPD (6.3up ) Series name (mm) 180 820 0.10 90 0.046 0.14 1190 UHD1H181MPD Type D 5 6.3 8 10 12.5 16 18 (L < 20) 1.5 220 1016 0.10 110 0.042 0.12 1370 UHD1H221MPD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 (L 20) 2.0 Configuration 50 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 270 1020 0.10 135 0.030 0.090 1580 UHD1H271MPD Pb-free leadwire 1H D Pb-free PET sleeve In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm 330 1025 0.10 165 0.028 0.085 1870 UHD1H331MPD 5 DD 6.3 ED 470 12.520 0.10 235 0.027 0.068 2050 UHD1H471MHD Please refer to the Guidelines for Aluminum Electrolytic Capacitors 8 10 PD for end seal configuration information. 560 12.525 0.10 280 0.023 0.059 2410 UHD1H561MHD 12.5 to 18 HD 680 12.531.5 0.10 340 0.021 0.052 2860 UHD1H681MHD Frequency coefficient of rated ripple current 820 12.535.5 0.10 410 0.019 0.051 2960 UHD1H821MHD Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Cap. (F) 820 1620 0.10 410 0.023 0.059 2730 UHD1H821MHD6 0.45 0.70 0.90 1.00 2.2 to 33 0.55 1000 1625 0.10 500 0.021 0.056 3010 UHD1H102MHD 39 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. 0.75 0.80 0.95 1.00 1.00 1200 to 18000 For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. Dimension table in next page. CAT.8100K +0.5 MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS UHE UHE Dimensions Dimensions Impedance Impedance Leakage Current Leakage Current Rated Voltage Rated Rated Ripple Rated Voltage Rated Rated Ripple MAX. MAX. Case Size Case Size A A V Capacitance tan mArms Part Number V Capacitance tan mArms Part Number DLmm DLmm at 20 after 20/ 10/ at 20 after 20/ 10/ code F 105/100kHz code F 105/100kHz 2 minutes 2 minutes 100kHz 100kHz 100kHz 100kHz 150 511 0.22 9.45 0.58 2.30 210 UHE0J151MDD 5600 1820 0.27 560 0.026 0.067 2860 UHE1A562MHD3 330 6.311 0.22 20.79 0.22 0.87 340 UHE0J331MED 6800 1631.5 0.29 680 0.017 0.050 3450 UHE1A682MHD 680 811.5 0.22 42.84 0.13 0.52 640 UHE0J681MPD 6800 1825 0.29 680 0.019 0.049 3140 UHE1A682MHD6 820 1012.5 0.22 51.66 0.080 0.32 865 UHE0J821MPD 8200 1635.5 0.33 820 0.015 0.044 3610 UHE1A822MHD 10 1A 1000 815 0.22 63 0.087 0.35 840 UHE0J102MPD 8200 1831.5 0.33 820 0.015 0.040 4170 UHE1A822MHD6 1200 820 0.22 75.6 0.069 0.27 1050 UHE0J122MPD 10000 1640 0.37 1000 0.013 0.038 4080 UHE1A103MHD 1200 1016 0.22 75.6 0.060 0.24 1210 UHE0J122MPD6 10000 1835.5 0.37 1000 0.014 0.038 4220 UHE1A103MHD6 1500 1020 0.22 94.5 0.046 0.18 1400 UHE0J152MPD 12000 1840 0.41 1200 0.012 0.032 4280 UHE1A123MHD 1800 12.515 0.22 113.4 0.049 0.16 1450 UHE0J182MHD 56 511 0.16 8.96 0.58 2.30 210 UHE1C560MDD 2200 1025 0.24 138.6 0.042 0.17 1650 UHE0J222MPD 120 6.311 0.16 19.2 0.22 0.87 340 UHE1C121MED 2700 1031.5 0.24 170.1 0.031 0.12 1910 UHE0J272MPD6 330 811.5 0.16 52.8 0.13 0.52 640 UHE1C331MPD 2700 1615 0.24 170.1 0.042 0.12 1940 UHE0J272MHD 470 815 0.16 75.2 0.087 0.35 840 UHE1C471MPD 3300 12.520 0.26 207.9 0.035 0.12 1900 UHE0J332MHD 470 1012.5 0.16 75.2 0.080 0.32 865 UHE1C471MPD6 3900 12.525 0.26 245.7 0.027 0.089 2230 UHE0J392MHD 680 820 0.16 108.8 0.069 0.27 1050 UHE1C681MPD 6.3 0J 3900 1815 0.26 245.7 0.043 0.11 2210 UHE0J392MHD6 680 1016 0.16 108.8 0.060 0.24 1210 UHE1C681MPD6 4700 12.531.5 0.28 296.1 0.024 0.078 2650 UHE0J472MHD 1000 1020 0.16 160 0.046 0.18 1400 UHE1C102MPD 5600 12.535.5 0.30 352.8 0.020 0.065 2880 UHE0J562MHD 1000 12.515 0.16 160 0.049 0.16 1450 UHE1C102MHD6 5600 1620 0.30 352.8 0.027 0.078 2530 UHE0J562MHD6 1200 1025 0.16 192 0.042 0.17 1650 UHE1C122MPD 6800 12.540 0.32 428.4 0.017 0.056 3350 UHE0J682MHD 1500 1031.5 0.16 240 0.031 0.12 1910 UHE1C152MPD 6800 1625 0.32 428.4 0.021 0.060 2930 UHE0J682MHD6 1500 12.520 0.16 240 0.035 0.12 1900 UHE1C152MHD6 6800 1820 0.32 428.4 0.026 0.067 2860 UHE0J682MHD3 1500 1615 0.16 240 0.042 0.12 1940 UHE1C152MHD3 8200 1631.5 0.36 516.6 0.017 0.050 3450 UHE0J822MHD 2200 12.525 0.18 352 0.027 0.089 2230 UHE1C222MHD 16 1C 10000 1635.5 0.40 630 0.015 0.044 3610 UHE0J103MHD 2200 1815 0.18 352 0.043 0.11 2210 UHE1C222MHD6 10000 1825 0.40 630 0.019 0.049 3140 UHE0J103MHD6 2700 12.531.5 0.18 432 0.024 0.078 2650 UHE1C272MHD 12000 1640 0.44 756 0.013 0.038 4080 UHE0J123MHD 2700 1620 0.18 432 0.027 0.078 2530 UHE1C272MHD6 12000 1831.5 0.44 756 0.015 0.040 4170 UHE0J123MHD6 3300 12.535.5 0.20 528 0.020 0.065 2880 UHE1C332MHD 15000 1835.5 0.50 945 0.014 0.038 4220 UHE0J153MHD 3900 12.540 0.20 624 0.017 0.056 3350 UHE1C392MHD 18000 1840 0.56 1134 0.012 0.032 4280 UHE0J183MHD 3900 1625 0.20 624 0.021 0.060 2930 UHE1C392MHD6 100 511 0.19 10 0.58 2.30 210 UHE1A101MDD 3900 1620 0.20 624 0.026 0.067 2860 UHE1C392MHD3 220 6.311 0.19 22 0.22 0.87 340 UHE1A221MED 4700 1631.5 0.22 752 0.017 0.050 3450 UHE1C472MHD 470 811.5 0.19 47 0.13 0.52 640 UHE1A471MPD 4700 1825 0.22 752 0.019 0.049 3140 UHE1C472MHD6 680 815 0.19 68 0.087 0.35 840 UHE1A681MPD 5600 1635.5 0.24 896 0.015 0.044 3610 UHE1C562MHD 680 1012.5 0.19 68 0.080 0.32 865 UHE1A681MPD6 5600 1831.5 0.24 896 0.015 0.040 4170 UHE1C562MHD6 1000 820 0.19 100 0.069 0.27 1050 UHE1A102MPD 6800 1640 0.26 1088 0.013 0.038 4080 UHE1C682MHD 1000 1016 0.19 100 0.060 0.24 1210 UHE1A102MPD6 8200 1835.5 0.30 1312 0.014 0.038 4220 UHE1C822MHD 1200 1020 0.19 120 0.046 0.18 1400 UHE1A122MPD 10000 1840 0.34 1600 0.012 0.032 4280 UHE1C103MHD 1500 1025 0.19 150 0.042 0.17 1650 UHE1A152MPD 47 511 0.14 11.75 0.58 2.30 210 UHE1E470MDD 1500 12.515 0.19 150 0.049 0.16 1450 UHE1A152MHD6 100 6.311 0.14 25 0.22 0.87 340 UHE1E101MED 10 1A 2200 1031.5 0.21 220 0.031 0.12 1910 UHE1A222MPD 220 811.5 0.14 55 0.13 0.52 640 UHE1E221MPD 2200 12.520 0.21 220 0.035 0.12 1900 UHE1A222MHD6 330 815 0.14 82.5 0.087 0.35 840 UHE1E331MPD 2200 1615 0.21 220 0.042 0.12 1940 UHE1A222MHD3 330 1012.5 0.14 82.5 0.080 0.32 865 UHE1E331MPD6 2700 1815 0.21 270 0.043 0.11 2210 UHE1A272MHD 470 820 0.14 117.5 0.069 0.27 1050 UHE1E471MPD 25 1E 3300 12.525 0.23 330 0.027 0.089 2230 UHE1A332MHD 470 1016 0.14 117.5 0.060 0.24 1210 UHE1E471MPD6 3900 12.531.5 0.23 390 0.024 0.078 2650 UHE1A392MHD 680 1020 0.14 170 0.046 0.18 1400 UHE1E681MPD 3900 1620 0.23 390 0.027 0.078 2530 UHE1A392MHD6 680 12.515 0.14 170 0.049 0.16 1450 UHE1E681MHD6 4700 12.535.5 0.25 470 0.020 0.065 2880 UHE1A472MHD 820 1025 0.14 205 0.042 0.17 1650 UHE1E821MPD 5600 12.540 0.27 560 0.017 0.056 3350 UHE1A562MHD 1000 1031.5 0.14 250 0.031 0.12 1910 UHE1E102MPD 5600 1625 0.27 560 0.021 0.060 2930 UHE1A562MHD6 1000 12.520 0.14 250 0.035 0.12 1900 UHE1E102MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. If there is no size code in the part number, please add size code 1 and then add the appropriate code. CAT.8100K