Document Number: FRDMKW24DUG NXP Semiconductors Rev. 1, 05/2016 Users Guide FRDM-KW24D512 Freedom Development Platform Users Guide Contents 1 Introduction 1. Introduction 1 1.1.Audience 1 This manual describes the development platform, 2. Safety Information . 1 FRDM-KW24D512. It has a diverse reference design with 2.1.FCC guidelines . 1 2.2.Regulatory approval for Canada (IC RSS 210) . 2 all necessary I/O connections to use as a self-contained 2.3.Electrostatic discharge considerations 3 platform or for connection to an external application. 2.4.Disposal instructions . 3 3. FRDM-KW24D512 Overview and Description . 3 The MKW24D512 is a 2.4 GHz Industrial, Scientific, and 3.1.Introduction 3 Medical (ISM) single-chip device intended for the IEEE 3.2.Platform features 4 Std. 802.15.4, including Thread, ZigBee Pro stack, ZigBee 3.3.Software and driver considerations 6 RF4CE standards, and IPv6/6loWPAN protocols. 4. FRDM-KW24D512 Development Platform . 6 4.1.FRDM-KW24D512 platform overview 6 The FRDM-KW24D512 contains the MKW24D512 4.2.Functional description 9 4.3.Schematic, platform layout, and bill of material . 17 transceiver that is typically combined with a software stack 5. PCB Manufacturing Specifications . 26 to implement an IEEE Std. 802.15.4 platform solutions. 5.1.Single PCB construction . 27 5.2.Panelization . 28 5.3.Materials . 28 1.1 Audience 5.4.Solder mask . 28 5.5.Silk screen 28 This document is intended for system designers. 5.6.Electrical PCB testing . 29 5.7.Packaging 29 5.8.Hole specification/tool table 29 2 Safety Information 5.9.File description 29 6. Revision History 29 2.1 FCC guidelines This equipment is used by developers for evaluation purposes only and must not be incorporated into any other Safety Information devices or systems. Integrators are responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. FCC approval of this device only covers the original configuration of this device as supplied. Any modifications to this product, including changes shown in this document, may violate the rules of the Federal Communications Commission and Industry Canada and make operation of the product unlawful. 2.1.1 Labeling FCC labels are physically located on the back of the platform. 2.1.2 Operating conditions This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 2.1.3 Exposure limits This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this equipment must be installed to provide a separation distance of at least 8 inches (20 cm) from all persons. 2.1.4 Antenna restrictions An intentional radiator is designed to ensure that no antenna other than that furnished by the responsible party is used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator is considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier current devices or to devices operated under the provisions of Sections 15.211, 15.213, 15.217, 15.219, or 15.221 of the IEEE Std. 802.15.4. In addition, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with Section 15.31(d) of the IEEE Std. 802.15.4, must be measured at the installation site. However, the installer is responsible for ensuring that the proper antenna is employed so that the limits in this Part are not exceeded. 2.2 Regulatory approval for Canada (IC RSS 210) This equipment complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: This platform may not cause interference. This platform must accept any interference, including interference that may cause undesired operation of the device. Freedom Development Board FRDM-KW24D512 Users Guide, Rev. 1, 05/2016 2 NXP Semiconductors